Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › BRAKE CONTROL SYSTEM
NM32H0E _54 Brake _060230 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0295457 BRAKE CONTROL SYSTEM CO CONTROL F

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  BRAKE CONTROL SYSTEM  CONTROL  PRE-COLLISION BRAKE  


SYSTEM CONTROL


a.

Based on the signal output by the millimeter wave radar sensor assembly in response to the possibility of collision as determined by the pre-collision, the skid control ECU sets the pre-collision brake assist to standby mode, controls the brake fluid pressure to each wheel in order to reduce the speed at collision, and at the same time illuminates the stop lights. For details about the pre-collision brake, refer to the pre-collision system.