Home › Engine / Hybrid System › 3ZR-FAE ENGINE MECHANICAL › ENGINE UNIT
NM32H0E _51 Engine / Hybrid System _060231 3ZR-FAE ENGINE MECHANICAL _0295458 ENGINE UNIT DE DETAILS F

3ZR-FAE ENGINE MECHANICAL  ENGINE UNIT  DETAILS  VVT-i CONTROLLER  


CONSTRUCTION


a.

Each VVT-i controller (camshaft timing gear assembly and camshaft timing exhaust gear assembly) consists of a housing driven by the chain sub-assembly and a vane coupled with the intake or exhaust camshaft.


b.

Both the intake and exhaust sides have a 4-blade vane.


c.

The oil pressure sent from the advanced or retarded side path at the intake and exhaust camshafts causes rotation in the VVT-i controller vane circumferential direction to allow for continuous vibration of the intake and exhaust valve timing.


d.

When the engine is stopped, a lock pin locks the intake camshaft at the most retarded position and the exhaust camshaft at the most advanced position in order to enhance startability.


e.

An advance assist spring is provided on the exhaust side VVT-i controller (camshaft timing exhaust gear assembly). This spring applies torque in the advance direction when the engine is stopped, thus ensuring engagement of the lock pin.

Intake VVT-i Controller (Camshaft Timing Gear Assembly)
W100346C07
3.25,2.615 5.563,3.698 2.313,1.083 2.656,0.479 2.927,0.479 2.927,0.479 3.125,0.813 true 4.25,1.833 4.083,1.833 4.083,1.833 4.083,1.417 true 3.875,0.719 3.708,0.302 3.708,0.302 3.542,0.302 true 5.104,1.427 5.229,1.625 5.229,1.625 5.5,1.625 true 6.281,1.167 6.031,1.167 6.031,1.167 5.917,0.948 true 6.323,1.094 6.635,1.25 0.313,0.156 10 false *5 2.51,0.406 2.823,0.563 0.313,0.156 10 false *1 3.354,0.24 3.667,0.396 0.313,0.156 10 false *2 4.313,1.75 4.625,1.906 0.313,0.156 10 false *3 5.552,1.552 5.865,1.708 0.313,0.156 10 false *4 3.656,3.385 3.979,3.542 0.323,0.156 10 false *a 4.583,3.375 4.896,3.531 0.313,0.156 10 false *b 3.302,2.667 3.615,2.823 0.313,0.156 10 false *3
*1 Housing *2 Vane (Fixed on Intake Camshaft)
*3 Lock Pin *4 Sprocket
*5 Intake Camshaft - -
*a At a Stop *b In Operation
V100135

Oil Pressure - -


Exhaust VVT-i Controller (Camshaft Timing Exhaust Gear Assembly)
W100431C07
1.906,1.5 1.906,0.583 1.906,0.583 1.49,0.583 true 4.021,0.708 4.021,0.292 4.021,0.292 3.854,0.292 true 3.313,1.865 3.438,2.167 3.438,2.167 3.646,2.167 true 4.115,1.604 4.24,1.906 4.24,1.906 4.448,1.906 true 5.094,1.427 5.219,1.729 5.219,1.729 5.427,1.729 true 6,0.802 6.125,1.104 6.125,1.104 6.333,1.104 true 1.313,0.521 1.625,0.677 0.313,0.156 10 false *1 3.688,0.219 4,0.375 0.313,0.156 10 false *2 3.667,2.104 3.979,2.26 0.313,0.156 10 false *3 4.469,1.833 4.781,1.99 0.313,0.156 10 false *4 5.5,1.635 5.813,1.792 0.313,0.156 10 false *5 6.375,1.031 6.688,1.188 0.313,0.156 10 false *6
*1 Advance Assist Spring *2 Lock Pin
*3 Housing *4 Vane (Fixed on Exhaust Camshaft)
*5 Sprocket *6 Exhaust Camshaft




OPERATION


a.

Advance

i.

When the camshaft timing oil control valve assembly is positioned as shown in the illustration below by the advance signal from the ECM, the resultant oil pressure is applied to the timing advance side vane chamber to rotate the camshaft in the timing advance direction:

Intake Side
W133604C01
4.771,3.354 5.104,3.354 true 0.865,2.521 1.021,3.115 1.021,3.115 1.188,3.115 true 1.677,2.542 1.833,3.135 1.833,3.135 2,3.135 true 2.042,3.052 2.354,3.208 0.313,0.156 10 false *1 6.49,1.573 6.802,1.729 0.313,0.156 10 false *2 1.229,3.031 1.542,3.188 0.313,0.156 10 false *a 4.604,3.271 4.917,3.427 0.313,0.156 10 false *b 5.042,3.469 5.354,3.625 0.313,0.156 10 false *c 5.344,3.479 5.656,3.635 0.313,0.156 10 false *d
*1 Vane *2 ECM
*a Rotation Direction *b Oil Pressure
*c In *d Drain


Exhaust Side
W133605C01
1.49,2.604 1.75,2.917 1.75,2.917 1.917,2.917 true 0.427,2.771 0.594,2.771 0.594,2.771 0.802,2.49 true 4.917,3.365 5.25,3.365 true 1.979,2.823 2.292,2.979 0.313,0.156 10 false *1 6.26,1.563 6.573,1.719 0.313,0.156 10 false *2 0.229,2.667 0.542,2.823 0.313,0.156 10 false *a 5.271,3.281 5.583,3.438 0.313,0.156 10 false *b 4.875,3.479 5.188,3.635 0.313,0.156 10 false *c 4.573,3.479 4.885,3.635 0.313,0.156 10 false *d
*1 Vane *2 ECM
*a Rotation Direction *b Oil Pressure
*c In *d Drain




b.

Retard

i.

When the camshaft timing oil control valve assembly is positioned as illustrated below by the retard signals from the ECM, the resultant oil pressure is applied to the timing retard side vane chamber to rotate the camshaft in the timing retard direction:

Intake Side
W133606C01
5.125,3.344 5.458,3.344 true 0.448,2.906 0.625,2.906 0.625,2.906 0.698,2.49 true 1.49,2.563 1.708,2.99 1.708,2.99 1.875,2.99 true 0.271,2.802 0.583,2.958 0.313,0.156 10 false *1 6.49,1.573 6.802,1.729 0.313,0.156 10 false *2 1.927,2.896 2.24,3.052 0.313,0.156 10 false *a 5.49,3.24 5.802,3.396 0.313,0.156 10 false *b 5.094,3.469 5.406,3.625 0.313,0.156 10 false *c 4.75,3.479 5.063,3.635 0.313,0.156 10 false *d
*1 Vane *2 ECM
*a Rotation Direction *b Oil Pressure
*c In *d Drain


Exhaust Side
W133607C01
4.563,3.375 4.896,3.375 true 1.313,2.625 1.479,3.021 1.479,3.021 1.646,3.021 true 0.5,2.833 0.667,2.833 0.667,2.833 0.781,2.49 true 0.323,2.74 0.635,2.896 0.313,0.156 10 false *1 6.292,1.583 6.604,1.74 0.313,0.156 10 false *2 1.677,2.948 1.99,3.104 0.313,0.156 10 false *a 4.417,3.281 4.729,3.438 0.313,0.156 10 false *b 4.844,3.469 5.156,3.625 0.313,0.156 10 false *c 5.135,3.469 5.448,3.625 0.313,0.156 10 false *d
*1 Vane *2 ECM
*a Rotation Direction *b Oil Pressure
*c In *d Drain




c.

Hold

i.

After reaching the target timing, the engine valve timing is maintained by keeping the camshaft timing oil control valve assembly in the neutral position unless the engine operating conditions change. This maintains the engine valve timing at the desired target position by prevents the engine oil from running out of the camshaft timing oil control valve assembly.