Home › Engine / Hybrid System › 3ZR-FAE ENGINE MECHANICAL › ENGINE UNIT
NM32H0E _51 Engine / Hybrid System _060231 3ZR-FAE ENGINE MECHANICAL _0295458 ENGINE UNIT DE DETAILS F

3ZR-FAE ENGINE MECHANICAL  ENGINE UNIT  DETAILS  PISTON  


CONSTRUCTION


a.

The pistons are made of aluminum alloy to allow them to be compact and lightweight.


b.

The piston head portion uses a taper squish shape to achieve fuel combustion efficiency.


c.

Full floating type piston pins are used.


d.

An anodic oxide coating is applied to the No. 1 compression ring groove to ensure abrasion resistance.


e.

The piston skirt is coated with resin to reduce friction losses.


f.

Low-tension piston rings are used to reduce friction and achieve excellent fuel economy.


g.

Narrow-width piston rings are used to reduce weight and friction.


h.

A No. 1 compression ring with an inside bevel shape is used to reduce blowby gas.


i.

The sliding surface of the No. 2 compression ring is chrome plated for improved wear resistance.


j.

A Physical Vapor Deposition (PVD) coating has been applied to the surface of the No. 1 compression ring and the oil ring in order to improve wear resistance.

W133608C01
1.396,0.635 1.563,0.635 1.563,0.635 1.948,0.844 true 3.552,0.854 3.76,0.625 3.76,0.625 3.927,0.625 true 1.385,1.51 1.552,1.51 1.552,1.51 2.01,1.198 true 1.396,2.063 1.563,2.063 1.563,2.063 2.021,1.75 true 5.208,0.74 5.417,0.51 5.417,0.51 5.583,0.51 true 5.208,1.646 5.417,1.417 5.417,1.417 5.583,1.417 true 5.219,1.281 5.427,1.052 5.427,1.052 5.594,1.052 true 5.208,1.969 5.427,2.281 5.427,2.281 5.594,2.281 true 2.646,2.083 2.958,2.24 0.313,0.156 10 false *1 5.344,0.74 5.656,0.896 0.313,0.156 10 false *2 5.344,1.188 5.656,1.344 0.313,0.156 10 false *3 5.344,1.74 5.656,1.896 0.313,0.156 10 false *4 3.958,0.531 4.271,0.688 0.313,0.156 10 false *a 1.208,1.417 1.521,1.573 0.313,0.156 10 false *b 1.188,1.979 1.5,2.135 0.313,0.156 10 false *c 5.625,0.417 5.938,0.573 0.313,0.156 10 false *d 5.667,0.958 5.979,1.115 0.313,0.156 10 false *e 5.625,1.333 5.938,1.49 0.313,0.156 10 false *d 5.625,2.177 5.938,2.333 0.313,0.156 10 false *d 1.198,0.531 1.51,0.688 0.313,0.156 10 false *a
*1 Piston *2 No. 1 Compression Ring
*3 No. 2 Compression Ring *4 Oil Ring
*a Taper Squish Shape *b Anodic Oxide Coating
*c Resin Coating *d PVD Coating
*e Chrome Plating - -