Home › Engine / Hybrid System › 3ZR-FAE LUBRICATION › LUBRICATION SYSTEM
NM32H0E _51 Engine / Hybrid System _060341 3ZR-FAE LUBRICATION _0295797 LUBRICATION SYSTEM DE DETAILS F

3ZR-FAE LUBRICATION  LUBRICATION SYSTEM  DETAILS  OIL PUMP  


CONSTRUCTION


a.

The variable discharge oil pump assembly is made up of a trochoid gear and a relief valve that distributes the oil into 3 oil passages according to the oil pump rotation speed.


b.

The relief valve reduces parasitic losses of engine power by providing appropriate oil pressure for each engine speed range.

W110130C02
3.594,1.417 5.635,1.417 true 3.802,2.75 5.531,2.75 true 5.688,1.344 6,1.5 0.313,0.156 10 *1 5.563,2.667 5.875,2.875 0.313,0.208 10 *2
*1 Trochoid Gear *2 Relief Valve




OPERATION


a.

Low Engine Speed Range

i.

At the low engine speed range, the oil pump assembly rotation speed and the discharge pressure are both low, so relief ports A and B are closed, and the oil in oil passages A and B is sent to the engine. As a result, the increase in discharge pressure is proportionate to the increase in rotation speed of the oil pump assembly.

W111383E01
2.802,0.281 2.646,0.281 2.646,0.281 2.646,1.083 true 1.583,3.083 1.583,2.26 1.583,2.26 2.094,2.26 true 3.031,0.729 2.875,0.729 2.875,0.729 2.875,1.531 true 3.063,3.354 2.875,3.354 2.875,3.354 2.875,2.323 true 2.333,3.354 2.333,2.344 2.333,2.344 2.563,2.344 true 1.396,0.604 1.885,0.604 1.885,0.604 1.885,1.688 true 5.521,0.51 5.156,0.51 5.156,0.51 5.156,2.208 true 0.146,1.625 0.76,2.354 0.615,0.729 10 from Oil Strainer Sub-assembly 0.458,0.521 1.417,0.729 0.958,0.208 10 Oil Passage A 1.104,3.104 2.094,3.333 0.99,0.229 10 Oil Passage B 2.854,0.198 4.073,0.448 1.219,0.25 10 Relief Valve Spring 3.073,0.646 3.896,0.854 0.823,0.208 10 Relief Port A 3.104,3.281 3.927,3.49 0.823,0.208 10 Relief Port B 3.542,1.802 4.354,2.24 0.813,0.438 10 Discharge to Engine 1.958,3.396 2.823,3.625 0.865,0.229 10 Relief Valve 3.948,0.792 4.635,1.396 0.688,0.604 10 Oil Pump Discharge Pressure 5.583,0.406 6.76,0.76 1.177,0.354 10 Low Engine Speed Range Area 5.469,2.635 7.063,2.875 1.594,0.24 10 Oil Pump Rotation Speed



b.

Middle Engine Speed Range

i.

At the middle engine speed range, the discharge pressure in the oil pump assembly increases enough to overcome the pressure of the relief valve spring, and the relief valve is raised.


ii.

The relief valve opens relief port A, and the oil in oil passage A is returned to the inlet side of the oil pump assembly. As a result, the volume of oil sent to the engine is controlled, and the increase in discharge pressure becomes more moderate than the increase in oil pump assembly rotation speed.

W108589E02
3.094,0.146 2.896,0.146 2.896,0.146 2.896,0.917 true 1.958,0.323 2.188,0.323 2.188,0.323 2.188,1.51 true 2.385,2.063 1.896,2.063 1.896,2.063 1.896,2.646 true 2.823,2.042 2.583,2.042 2.583,2.042 2.583,3.313 true 3.219,0.625 3.156,0.625 3.156,0.625 3.156,1.385 true 5.802,0.313 5.542,0.313 5.542,0.313 5.542,1.833 true 3.781,2.052 3.677,2.052 3.677,2.052 3.667,1.76 true 0.479,1.458 1.083,2.271 0.604,0.813 10 from Oil Strainer Sub-assembly 3.135,0.073 4.396,0.292 1.26,0.219 10 Relief Valve Spring 1.021,0.24 1.969,0.438 0.948,0.198 10 Oil Passage A 1.406,2.677 2.354,2.875 0.948,0.198 10 Oil Passage B 2.208,3.354 3.031,3.552 0.823,0.198 10 Relief Valve 3.25,0.542 4.094,0.76 0.844,0.219 10 Relief Port A 3.833,1.979 4.656,2.365 0.823,0.385 10 Discharge to Engine 5.854,0.24 7.115,0.906 1.26,0.667 10 Middle Engine Speed Range Area 4.167,0.573 4.823,1.115 0.656,0.542 10 Oil Pump Discharge Pressure 5.344,2.417 6.969,2.615 1.625,0.198 10 Oil Pump Rotation Speed 3.719,1.385 4.708,1.802 0.99,0.417 10 Return to Oil Pump Inlet Side



c.

High Engine Speed Range (While Engine Speed is Increasing)

i.

At the high engine speed range, the oil pump assembly rotation speed increases more, resulting in higher discharge pressure, and so the relief valve is raised further.


ii.

The relief valve closes relief port A and, at the same time, the flow of oil through oil passages A and B is allowed to merge again. This results in an increase in the volume of oil sent to the engine, increasing discharge pressure.

W108590E02
3.094,0.354 2.896,0.354 2.896,0.354 2.896,0.885 true 2.094,0.396 2.323,0.396 2.323,0.396 2.323,1.583 true 2.385,2.052 1.927,2.052 1.927,2.052 1.927,2.635 true 2.844,2.01 2.604,2.01 2.604,2.01 2.604,3.281 true 3.26,0.615 3.146,0.615 3.146,0.615 3.146,1.385 true 3.344,2.875 3.146,2.875 3.146,2.875 3.146,2.115 true 5.698,0.146 5.802,0.146 5.802,0.146 5.802,1.49 true 0.458,1.458 1.073,2.26 0.615,0.802 10 from Oil Strainer Sub-assembly 3.125,0.26 4.385,0.479 1.26,0.219 10 Relief Valve Spring 1.167,0.313 2.115,0.51 0.948,0.198 10 Oil Passage A 1.365,2.656 2.313,2.854 0.948,0.198 10 Oil Passage B 2.271,3.323 3.094,3.521 0.823,0.198 10 Relief Valve 3.302,0.531 4.146,0.75 0.844,0.219 10 Relief Port A 3.396,2.792 4.24,3.01 0.844,0.219 10 Relief Port B 3.719,1.594 4.542,1.906 0.823,0.313 10 Discharge to Engine 4.813,0.021 5.688,1.083 0.875,1.063 10 High Engine Speed Range Area (While Engine Speed is Increasing) 4.125,0.677 4.792,1.188 0.667,0.51 10 Oil Pump Discharge Pressure 5.292,2.385 6.917,2.583 1.625,0.198 10 Oil Pump Rotation Speed



d.

High Engine Speed Range (While Pressure is being Regulated)

i.

When the pressure is being regulated at the high engine speed range, the relief valve starts to open port B, and starts to return the flow of oil in oil passage C to the inlet side of the oil pump assembly. As a result, the increase in discharge pressure from the oil pump assembly again becomes more moderate than the increase in rotation speed.

W111386E01
2.01,1.729 2.01,0.76 2.01,0.76 1.75,0.76 true 1.042,2.802 1.042,2.281 1.042,2.281 2.146,2.281 true 1.688,3.104 1.688,2.49 1.688,2.49 1.969,2.49 true 2.708,1.073 2.708,0.396 2.708,0.396 2.865,0.396 true 2.396,3.365 2.396,2.177 2.396,2.177 2.563,2.177 true 2.979,1.552 2.979,0.958 2.979,0.958 3.135,0.958 true 3.25,3.021 2.979,3.021 2.979,3.021 2.979,2.323 true 3.656,2.406 3.552,2.406 3.552,2.406 3.531,2.229 true 6.24,1.396 6.24,0.156 6.24,0.156 5.979,0.156 true 0.188,1.656 0.813,2.396 0.625,0.74 10 from Oil Strainer Sub-assembly 0.656,2.833 1.594,3.083 0.938,0.25 10 Oil Passage B 0.823,0.677 1.76,0.927 0.938,0.25 10 Oil Passage A 1.229,3.115 2.167,3.365 0.938,0.25 10 Oil Passage C 2.917,0.323 4.125,0.542 1.208,0.219 10 Relief Valve Spring 2.104,3.396 2.927,3.635 0.823,0.24 10 Relief Valve 3.177,0.875 4,1.094 0.823,0.219 10 Relief Port A 3.302,2.948 4.125,3.167 0.823,0.219 10 Relief Port B 3.708,2.333 4.708,2.698 1,0.365 10 Return to Oil Pump Inlet Side 3.729,1.74 4.542,2.104 0.813,0.365 10 Discharge to Engine 4.052,0.802 4.688,1.333 0.635,0.531 10 Oil Pump Discharge Pressure 5.344,2.656 6.99,2.896 1.646,0.24 10 Oil Pump Rotation Speed 4.74,0.083 5.927,0.948 1.188,0.865 10 High Engine Speed Range Area (While Pressure is being Regulated)



e.

From High Engine Speed Range to Middle Engine Speed Range

i.

Due to the discharge pressure in the oil pump assembly when the rotation speed of the oil pump assembly falls from the high to the middle speed range, all of the oil in oil passage A is sent to the engine side via the relief valve. Because of this, the discharge pressure falls in accordance with the oil pump assembly rotation speed until relief port A is opened by the relief valve, and some of the oil in oil passage A is returned to the oil pump assembly inlet side. As a result, torque fluctuations in the oil pump assembly are suppressed, and engine speed decreases smoothly.

W111387E03
0.135,0.135 3.823,3.24 3.688,3.104 0.115,3.469 3.833,6.563 3.719,3.094 2.01,1.615 2.01,0.906 2.01,0.906 1.729,0.906 true 2.625,0.917 2.625,0.396 2.625,0.396 2.865,0.396 true 2.875,1.406 2.875,0.99 2.875,0.99 2.969,0.99 true 1.594,2.646 1.594,2.094 1.594,2.094 2.073,2.094 true 2.302,2.885 2.302,2.063 2.302,2.063 2.5,2.063 true 2.969,2.927 2.896,2.927 2.896,2.927 2.896,2.167 true 6.021,3.729 5.865,3.729 5.865,3.729 5.479,3.51 true 1.969,4.927 1.969,4.219 1.969,4.219 1.688,4.219 true 1.552,6.031 1.552,5.479 1.552,5.479 2.031,5.479 true 2.292,6.219 2.292,5.396 2.292,5.396 2.49,5.396 true 2.635,4.229 2.635,3.74 2.635,3.74 2.885,3.74 true 2.885,4.719 2.885,4.302 2.885,4.302 2.979,4.302 true 2.938,6.25 2.865,6.25 2.865,6.25 2.865,5.49 true 0.208,0.188 2.177,0.656 1.969,0.469 10 false Engine Middle Speed Range (when Engine Speed is Falling): 0.802,0.823 1.75,1.052 0.948,0.229 10 false Oil Passage A 0.188,1.51 0.802,2.354 0.615,0.844 10 false from Oil Strainer Sub-assembly 2.917,0.323 3.677,0.729 0.76,0.406 10 false Relief Valve Spring 3.01,0.917 3.833,1.25 0.823,0.333 10 false Relief Port A 3.188,1.844 3.833,2.219 0.646,0.375 10 false Discharge to Engine 1.052,2.656 2.052,2.927 1,0.271 10 false Oil Passage B 1.99,2.917 2.771,3.104 0.781,0.188 10 false Relief Valve 3,2.844 3.875,3.073 0.875,0.229 10 false Relief Port B 3.927,2.552 4.583,3.167 0.656,0.615 10 false Oil Pump Discharge Pressure 6.073,3.656 7.146,3.854 1.073,0.198 10 false P Point 5.344,4.26 6.979,4.531 1.635,0.271 10 false Oil Pump Rotation Speed 0.198,3.5 1.552,3.896 1.354,0.396 10 false P Point (just before Relief Port A Opens): 0.156,4.823 0.771,5.667 0.615,0.844 10 false from Oil Strainer Sub-assembly 0.781,4.135 1.729,4.365 0.948,0.229 10 false Oil Passage A 1.031,6.063 2.031,6.333 1,0.271 10 false Oil Passage B 1.99,6.25 2.771,6.438 0.781,0.188 10 false Relief Valve 2.958,3.656 3.719,4.063 0.76,0.406 10 false Relief Valve Spring 3.177,5.219 3.802,5.615 0.625,0.396 10 false Discharge to Engine 3.042,4.219 3.865,4.552 0.823,0.333 10 false Relief Port A 2.979,6.177 3.854,6.406 0.875,0.229 10 false Relief Port B