Home › Engine / Hybrid System › 8NR-FTS (ENGINE MECHANICAL) › ENGINE UNIT › 2016.10–2018.05
NM32H0E _51 Engine / Hybrid System _060377 8NR-FTS ENGINE MECHANICAL _0296145 ENGINE UNIT DE DETAILS F

8NR-FTS ENGINE MECHANICAL  ENGINE UNIT  DETAILS  CRANKSHAFT AND BEARING  


CONSTRUCTION


a.

The shape of the crankshaft has been optimized to achieve a higher dimension of weight reduction, reliability and quietness.


b.

The oil groove on the crankshaft bearing is made eccentric to reduce the amount of oil leakage from the bearing. This enables the capacity of the oil pump to be reduced in order to achieve a low friction operation.


c.

The lining surfaces of the crankshaft bearings have been micro-grooved to achieve an optimal amount of oil clearance. As a result, cold-engine cranking performance has been improved and engine vibration has been reduced.


d.

Lead-free materials have been used for the crankshaft, crankshaft bearing and crankshaft thrust washer in consideration of environmental issues.

W126986C02
0.542,1.406 0.75,1.406 0.75,1.406 1.177,2.135 true 4.667,3.615 4.896,3.333 4.896,3.333 5.052,3.333 true 1.135,3.24 1.344,3.24 1.344,3.24 1.552,3.615 true 3.417,2.792 3.625,2.792 3.625,2.792 3.833,3.167 true 0.344,1.313 0.563,1.521 0.219,0.208 10 false *1 0.938,3.156 1.167,3.313 0.229,0.156 10 false *2 5.094,3.25 5.292,3.458 0.198,0.208 10 false *3 3.063,4.156 3.25,4.344 0.188,0.188 10 false *a 3.219,2.698 3.417,2.906 0.198,0.208 10 false *b
*1 Crankshaft *2 Crankshaft Thrust Washer
*3 Crankshaft Bearing - -
*a Micro-grooved *b Oil Groove