Home › Engine / Hybrid System › 8NR-FTS (ENGINE CONTROL) › SFI SYSTEM › 2016.10–2018.05
NM32H0E _51 Engine / Hybrid System _060396 8NR-FTS ENGINE CONTROL _0296167 SFI SYSTEM CO CONTROL F

8NR-FTS ENGINE CONTROL  SFI SYSTEM  CONTROL  TURBOCHARGER CONTROL  


FUNCTION


a.

For the turbocharger control, wastegate valve control which controls the turbo pressure and air bypass valve control which prevents the surge phenomenon* are used.

HINT:

*: Surge phenomenon: This phenomenon is when the intake airflow reverses. As a result, an abnormal noise is easily generated during deceleration.


i.

The ECM cooperatively controls the throttle valve, VVT-iW, VVT-i and wastegate valve to achieve a driving condition with optimal fuel efficiency during normal driving. Also, the ECM controls each actuator in accordance with the driver's intentions during acceleration to achieve a high torque response.



b.

Wastegate Valve Control

i.

During Engine Start

The ECM controls the vacuum regulating valve assembly to block the vacuum from the vacuum pump assembly to the actuator and open the wastegate valve. As a result, high temperature exhaust gases are supplied for the catalyst and warm-up time has been reduced.



ii.

During Light Loads

The ECM controls the vacuum regulating valve assembly to block the vacuum from the vacuum pump assembly to the actuator, opening the wastegate valve and decreasing the exhaust manifold pressure. As a result, fuel economy has been enhanced due to reduced pumping loss and improved combustion (reduction of remaining gas).



iii.

During Acceleration and High Loads

The ECM controls the vacuum regulating valve assembly to control the vacuum from the vacuum pump assembly to the actuator and close the wastegate valve. As a result, engine torque increase and response during acceleration have been achieved.


W134790E01
0.208,0.25 2.854,0.479 2.646,0.229 10 false Intake Mass Air Flow Meter Sub-assembly 0.281,0.594 2.927,0.823 2.646,0.229 10 false Intake Air Temperature Sensor 0.198,1.115 2.844,1.344 2.646,0.229 10 false Crank Position Sensor 0.208,1.594 3.271,2.167 3.063,0.573 10 false Intake Cam Position Sensor (No. 1 Crank Position Sensor) 0.208,2.438 3.417,3.021 3.208,0.583 10 false Exhaust Cam Position Sensor (No. 2 Crank Position Sensor) 0.198,3.26 2.844,3.49 2.646,0.229 10 false Accelerator Pedal Sensor Assembly 0.198,3.74 2.844,3.969 2.646,0.229 10 false Throttle Position Sensor 0.208,4.219 2.854,4.448 2.646,0.229 10 false Engine Coolant Temperature Sensor 0.208,4.688 2.854,4.917 2.646,0.229 10 false No. 1 Turbo Pressure Sensor 0.281,5.042 2.927,5.271 2.646,0.229 10 false Intake Air Temperature Sensor 0.198,5.552 2.844,5.781 2.646,0.229 10 false No. 2 Turbo Pressure Sensor 4.625,2.896 5.083,3.094 0.458,0.198 10 false ECM 6.073,2.375 6.771,3.208 0.698,0.833 10 false Vacuum Regulating Valve Assembly



c.

Air Bypass Valve Control

i.

The ECM opens and closes the air bypass valve in accordance with driving conditions to prevent the surge phenomenon.

W134791E01
0.219,0.25 2.927,0.5 2.708,0.25 10 false Intake Mass Air Flow Meter Sub-assembly 0.281,0.604 2.99,0.854 2.708,0.25 10 false Intake Air Temperature Sensor 0.198,1.115 2.906,1.365 2.708,0.25 10 false Crank Position Sensor 0.208,1.594 2.917,1.844 2.708,0.25 10 false Accelerator Pedal Sensor Assembly 0.208,2.073 2.917,2.323 2.708,0.25 10 false Throttle Position Sensor 0.219,2.552 2.927,2.802 2.708,0.25 10 false No. 1 Turbo Pressure Sensor 0.271,2.906 2.979,3.156 2.708,0.25 10 false Intake Air Temperature Sensor 0.208,3.427 2.917,3.677 2.708,0.25 10 false No. 2 Turbo Pressure Sensor 4.656,1.729 5.115,1.927 0.458,0.198 10 false ECM 5.823,0.927 6.979,1.427 1.156,0.5 10 false Turbocharger Sub-assembly 6.021,1.625 6.729,2.156 0.708,0.531 10 false Air Bypass Valve