Home › Engine / Hybrid System › 8NR-FTS (ENGINE CONTROL) › SFI SYSTEM
NM32H0E _51 Engine / Hybrid System _060396 8NR-FTS ENGINE CONTROL _0296167 SFI SYSTEM DE DETAILS F

8NR-FTS ENGINE CONTROL  SFI SYSTEM  DETAILS  THROTTLE POSITION SENSOR  


CONSTRUCTION


a.

A non-contact type throttle position sensor is used. The sensor uses a Hall IC*2, which can retrieve the strength of the magnetic field as an electrical signal using Hall effect*1, in which the output voltage can be directly received in accordance with the throttle valve opening angle. When the throttle valve opening angle changes, the angle of the magnetic field towards the flow of the current in the Hall IC changes. As a result, the strength of the current and vertical magnetic field changes. Due to this, the change in the voltage generated in the vertical direction towards the current and direction of the magnetic field is sent to the ECM as a throttle valve opening angle signal. Also, duplicate sensors (main and sub) with differing sensor output characteristics, are used, ensuring reliability.

HINT:

*1: Phenomenon in which a potential difference occurs in the electric current and magnetic field in the vertical direction when a magnetic field in the vertical direction is applied and electric current is flowing through a rod or plated conductor or semiconductor.

*2: An electrical component which uses the electromotive force resulting from the potential difference in the magnetic field.


Sensor Output Characteristics
W107115E07
1.302,1.042 2.344,1.438 1.042,0.396 10 false Output Voltage 4.677,0.938 5.167,1.24 0.49,0.302 10 false VTA1 2.01,1.76 2.74,2.104 0.729,0.344 10 false Fully Open 4.427,1.813 5.26,2.167 0.833,0.354 10 false Fully Closed 4.667,0.656 6.24,0.885 1.573,0.229 10 false VTA2 2.646,2.135 4.448,2.635 1.802,0.5 10 false Throttle Valve Opening Angle