Home › Engine / Hybrid System › 8NR-FTS (FUEL) › FUEL SYSTEM › 2016.10–2018.05
NM32H0E _51 Engine / Hybrid System _060398 8NR-FTS FUEL _0296169 FUEL SYSTEM DE DETAILS F

8NR-FTS FUEL  FUEL SYSTEM  DETAILS  FUEL DELIVERY PIPE  


CONSTRUCTION


a.

A forged steel fuel delivery pipe is used.


b.

A fuel pressure sensor is installed to the fuel delivery pipe.


c.

A nozzle holder clamp is used for the installation area of the fuel injector assembly. The nozzle holder clamp constantly pushes the fuel injector assembly by the force of the spring to prevent the fuel injector assembly from moving when fuel pressure is applied to the fuel injector assembly while starting the engine with low fuel pressure. As a result, vibration and noise are reduced while at the same time airtightness is increased.


d.

A metal touch taper seal is used for the fuel pressure sensor and fuel pipe (for high pressure) fastener.

W126997C01
1.031,0.677 1.25,0.677 1.25,0.677 1.719,1.146 true 1.031,1.229 1.25,1.229 1.25,1.229 1.49,1.615 true 1.031,2.156 1.594,2.156 true 2.646,2.406 2.958,3.052 2.958,3.052 3.333,3.052 true 2.396,3.177 2.927,3.573 2.927,3.573 3.302,3.573 true 0.823,0.594 1.052,0.781 0.229,0.188 10 false *1 0.833,1.146 1.063,1.344 0.229,0.198 10 false *2 0.823,2.073 1.063,2.26 0.24,0.188 10 false *3 3.385,2.958 3.615,3.135 0.229,0.177 10 false *4 3.365,3.49 3.573,3.667 0.208,0.177 10 false *5
*1 Fuel Pipe (for High Pressure) *2 Fuel Delivery Pipe
*3 Fuel Pressure Sensor *4 Nozzle Holder Clamp
*5 Fuel Injector Assembly - -