Home › Engine / Hybrid System › 8NR-FTS (EMISSION CONTROL) › EMISSION CONTROL SYSTEM › 2016.10–2018.05
NM32H0E _51 Engine / Hybrid System _060399 8NR-FTS EMISSION CONTROL _0296170 EMISSION CONTROL SYSTEM DE DETAILS F

8NR-FTS EMISSION CONTROL  EMISSION CONTROL SYSTEM  DETAILS  THREE-WAY CATALYTIC CONVERTER (TWC)  


CONSTRUCTION


a.

On 2WD models, a thin-wall, high-cell density, ceramic type TWC is used for each exhaust manifold converter sub-assembly and a thin-wall, ceramic type TWC is used for the front exhaust pipe assembly.


b.

On AWD models, a thin-wall, high-cell density, ceramic type TWC is used for each exhaust manifold converter sub-assembly and a thin-wall, ceramic type TWC is used for the center No. 2 exhaust pipe assembly.


c.

An exhaust manifold converter sub-assembly with an integrated TWC is used. This realizes quick warm-up of the catalytic converter, helping to reduce emissions immediately after engine start.


d.

These TWCs enable improved exhaust emissions through optimized cell density and wall thickness.

2WD Models
W134810C01
2.833,2 3.417,1.333 3.417,1.333 3.583,1.333 true 4.188,2.417 4.5,2.917 4.5,2.917 4.667,2.917 true 3.646,1.25 3.958,1.406 0.313,0.156 10 false *1 4.708,2.833 5.021,2.99 0.313,0.156 10 false *2
*1 Exhaust Manifold Converter Sub-assembly
·

TWC


*2 Front Exhaust Pipe Assembly
·

TWC




AWD Models
W134811C01
2.938,1.958 3.417,1.333 3.417,1.333 3.563,1.333 true 4.583,2.583 5.083,3.083 5.083,3.083 5.25,3.083 true 3.615,1.25 3.927,1.406 0.313,0.156 10 false *1 5.302,2.99 5.615,3.146 0.313,0.156 10 false *2
*1 Exhaust Manifold Converter Sub-assembly
·

TWC


*2 Center No. 2 Exhaust Pipe Assembly
·

TWC