Home › Engine / Hybrid System › 8NR-FTS (INTAKE / EXHAUST) › INTAKE SYSTEM
NM32H0E _51 Engine / Hybrid System _060411 8NR-FTS INTAKE / EXHAUST _0296229 INTAKE SYSTEM DE DETAILS F

8NR-FTS INTAKE / EXHAUST  INTAKE SYSTEM  DETAILS  INTERCOOLER  


CONSTRUCTION


a.

The intercooler assembly is installed on top of the engine to reduce the length of the intake air path between the turbocharger sub-assembly and the cylinder head sub-assembly. This has reduced the intake air volume after the turbocharger sub-assembly and the pressure loss, enhancing acceleration response.


b.

A water-cooled type intercooler assembly is used to improve cooling efficiency and achieve size reduction.


c.

An inner fin is used in the coolant path to improve the cooling efficiency of the intercooler assembly.

W127005C01
3.698,3.844 6.969,6.188 3.271,2.344 1.99,2.031 2.146,2.031 2.146,2.031 2.729,2.375 true 4.229,2.344 4.479,2.052 4.479,2.052 4.698,2.052 true 4.052,4.333 4.208,4.333 4.208,4.333 4.656,4.625 true 1.792,1.958 2,2.146 0.208,0.188 10 false *1 4.74,1.979 4.938,2.156 0.198,0.177 10 false *2 3.854,4.26 4.063,4.438 0.208,0.177 10 false *3 3.75,3.906 3.948,4.083 0.198,0.177 10 false *a 1.042,4.531 1.198,4.729 0.156,0.198 10 false A 1.958,6.417 2.115,6.615 0.156,0.198 10 false A
*1 Intercooler Assembly *2 Intake Manifold
*3 Inner Fin - -
*a A-A Cross Section - -
V100135

Coolant
V100136

Intake Air