CONSTRUCTION
The exhaust pipe assemblies are made of stainless steel to reduce their weight and improve rust resistance.
On 2WD models, 2 ball joints are used to join the front exhaust pipe assembly to the exhaust manifold converter sub-assembly and the tail exhaust pipe assembly to the front exhaust pipe assembly. As a result, a simple construction and high reliability have been achieved.
| *1 | Front Exhaust Pipe Assembly
·
Sub Muffler |
*2 | Tail Exhaust Pipe Assembly
·
Main Muffler |
| *a | Ball Joint | - | - |
|
Exhaust Gas | - | - |
| *1 | Front Exhaust Pipe Assembly | *2 | Center No. 2 Exhaust Pipe Assembly |
| *3 | Tail Exhaust Pipe Assembly
·
Sub Muffler |
*4 | Tail Exhaust Pipe Assembly
·
Main Muffler |