Home › Engine / Hybrid System › 8NR-FTS (INTAKE / EXHAUST) › EXHAUST SYSTEM › 2016.10–2018.05
NM32H0E _51 Engine / Hybrid System _060411 8NR-FTS INTAKE / EXHAUST _0296230 EXHAUST SYSTEM GE GENERAL F

8NR-FTS INTAKE / EXHAUST  EXHAUST SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

A stainless steel exhaust pipe is used.


b.

On 2WD models, Three-Way Catalytic converters (TWCs) are provided in the exhaust manifold converter sub-assembly and front exhaust pipe assembly to reduce exhaust emissions.


c.

On AWD models, TWCs are provided in the exhaust manifold converter sub-assembly and center No. 2 exhaust pipe assembly to reduce exhaust emissions.


d.

By locating the exhaust manifold converter sub-assembly close to the engine unit, rapid warming of TWCs is promoted, which leads to low emissions.