Home › Engine / Hybrid System › 8NR-FTS LUBRICATION › LUBRICATION SYSTEM
NM32H0E _51 Engine / Hybrid System _060412 8NR-FTS LUBRICATION _0296232 LUBRICATION SYSTEM DE DETAILS F

8NR-FTS LUBRICATION  LUBRICATION SYSTEM  DETAILS  PISTON OIL JET  


CONSTRUCTION


a.

Piston jets (No. 1 oil nozzle sub-assembly) are provided for the cylinder block sub-assembly. By injecting oil to the inside of the cylinders, the piston, small end of the connecting rod and piston ring are lubricated, thereby achieving enhanced piston durability through decreased friction and suppressed temperature increase and preventing knocking.


b.

A piston jet control system which can control the piston jet engine oil injection is used.

W127015C01
1.281,0.542 1.51,0.542 1.51,0.542 1.896,0.927 true 2.521,3.417 2.521,2.531 true 3.292,3.406 3.292,2.521 true 4.042,3.385 4.042,2.5 true 4.813,3.385 4.813,2.5 true 1.094,0.469 1.292,0.667 0.198,0.198 10 false *1 2.427,3.448 2.635,3.635 0.208,0.188 10 false *2 3.219,3.438 3.427,3.625 0.208,0.188 10 false *2 3.969,3.427 4.177,3.615 0.208,0.188 10 false *2 4.729,3.427 4.938,3.615 0.208,0.188 10 false *2
*1 Cylinder Block Sub-assembly *2 Piston Jet (No. 1 Oil Nozzle Sub-assembly)




OPERATION


a.

The engine oil injection from the piston jets (No. 1 oil nozzle sub-assemblies) is controlled by the supply and cutting off of engine oil to the piston jet (No. 1 oil nozzle sub-assembly) based on the oil pressure switching valve assembly being turned on and off via the ECM.


b.

When Injection is Stopped

i.

Engine oil is supplied to the back of the relief valve and the supply of engine oil to the piston jet (No. 1 oil nozzle sub-assembly) is cut off.

W127016C01
3.698,3.135 4.063,2.573 4.063,2.573 4.219,2.573 true 5,1.542 5.24,1.135 5.24,1.135 5.396,1.135 true 4.448,3.625 4.99,3.625 true 4.271,2.5 4.469,2.708 0.198,0.208 10 false *1 5.438,1.052 5.635,1.26 0.198,0.208 10 false *2 4.281,0.021 4.49,0.188 0.208,0.167 10 true *3 4.25,3.552 4.448,3.74 0.198,0.188 10 false *4 1.427,3.594 1.646,3.802 0.219,0.208 10 true *a
*1 Relief Valve *2 Oil Pressure Switching Valve Assembly
*3 ECM (Operation Signal) *4 Piston Jet (No. 1 Oil Nozzle Sub-assembly)
*a Engine Oil (from Oil Pump Assembly) - -




c.

During Injection

i.

The supply of engine oil to the back of the relieve valve is stopped, the relief valve is opened, engine oil is supplied to the piston jet (No. 1 oil nozzle sub-assembly), and the piston jet (No. 1 oil nozzle sub-assembly) injects the engine oil.

W127017C01
3.698,2.875 3.958,2.563 3.958,2.563 4.146,2.563 true 4.906,1.479 5.167,1.167 5.167,1.167 5.354,1.167 true 4.448,3.594 5.01,3.594 true 4.198,2.479 4.406,2.677 0.208,0.198 10 false *1 5.396,1.083 5.615,1.26 0.219,0.177 10 false *2 4.281,0.031 4.469,0.208 0.188,0.177 10 true *3 4.26,3.521 4.458,3.708 0.198,0.188 10 false *4 1.438,3.594 1.625,3.781 0.188,0.188 10 true *a
*1 Relief Valve *2 Oil Pressure Switching Valve Assembly
*3 ECM (Operation Signal) *4 Piston Jet (No. 1 Oil Nozzle Sub-assembly)
*a Engine Oil (from Oil Pump) - -