OUTLINE
This lubrication method uses a full pressure-feeding and full filtration system using the oil pump.
Engine oil pressure-fed to the top of the cylinder head sub-assembly flows through the oil return hole provided on the cylinder head sub-assembly or the inside of the timing chain cover assembly and returns to the oil pan sub-assembly.
The Variable Valve Timing-intelligent Wide (VVT-iW) and Variable Valve Timing-intelligent (VVT-i) systems are used. These systems are operated by the engine oil.
A piston jet control system is used to control the injection and stop of engine oil from the piston jets (No. 1 oil nozzle sub-assemblies).
An oil pressure switching valve assembly for piston jet control system and relief valve are provided for the oil pump relief valve housing assembly.
2 separate oil galleries in the cylinder block sub-assembly, a main oil gallery for the crank journal oil passage and a sub oil gallery for the piston jet passage, are used.
| *1 | Oil Delivery Pipe | *2 | Oil Pump Relief Valve Housing Assembly |
| *3 | Oil Filter Sub-assembly | *4 | Oil Pump Assembly |