Home › Power Source / Network › 8NR-FTS (BATTERY / CHARGING) › CHARGING SYSTEM
NM32H0E _57 Power Source / Network _060418 8NR-FTS BATTERY / CHARGING _0296361 CHARGING SYSTEM DE DETAILS F

8NR-FTS BATTERY / CHARGING  CHARGING SYSTEM  DETAILS  BATTERY SENSOR  


CONSTRUCTION


a.

The battery state sensor assembly installed on the negative (-) battery terminal calculates the current, voltage, auxiliary battery temperature, SOC (auxiliary battery charging percentage), and self-diagnosis result and sends these signals to the ECM via LIN communication.


b.

To detect the current, a shunt resistor installed inside the battery state sensor assembly is used to convert and calculate the voltage generated in the shunt resistor due to the auxiliary battery charge and discharge current.


c.

The auxiliary battery temperature is calculated from the resistance value of the thermistor built in the battery state sensor assembly.

W134829C01
4.125,2.302 4.292,2.302 4.292,2.302 4.469,1.927 true 3.75,0.375 4.063,0.531 0.313,0.156 10 false *1 3.927,2.208 4.24,2.365 0.313,0.156 10 false *a
*1 Battery State Sensor Assembly - -
*a Shunt Resistor - -