Home › Engine / Hybrid System › STOP AND START › STOP AND START SYSTEM › 2016.10–2019.09
NM32H0E _51 Engine / Hybrid System _060727 STOP AND START _0297887 STOP AND START SYSTEM CO CONTROL F

STOP AND START  STOP AND START SYSTEM  CONTROL  EARLY STAGE INJECTION CONTROL  


SYSTEM CONTROL


a.

Early stage injection control shortens the time it takes the engine to restart after the stop and start system stops the engine, thus allowing smooth initial acceleration.


b.

The ECM memorizes the crankshaft angle detected by the crank position sensor when the engine is stopped by the stop and start system.


c.

The ECM judges the injection required and decides which cylinder to ignite when the driver does restart operation. The ECM then uses this information as it starts the engine.

W134843E01
0.25,1.083 2.135,1.313 1.885,0.229 10 false Engine Stop and Start ECU 2.771,1.083 3.333,1.354 0.563,0.271 10 false ECM 2.875,2.135 6.083,2.333 3.208,0.198 10 false Crank Position Sensor 0.583,2.385 4.25,2.583 3.667,0.198 10 false : CAN Communication Line 5.229,1.104 6.854,1.323 1.625,0.219 10 false Fuel Injector Assembly 5.229,1.5 6.479,1.729 1.25,0.229 10 false No. 1 Ignition Coil