Home › Vehicle Exterior › LIGHTING (EXT) › LIGHTING SYSTEM › 2016.10–2019.09
NM32H0E _59 Vehicle Exterior _060808 LIGHTING (EXT) _0298246 LIGHTING SYSTEM CO CONTROL F

LIGHTING (EXT)  LIGHTING SYSTEM  CONTROL  AUTOMATIC HEADLIGHT BEAM LEVEL CONTROL  


FUNCTION OF MAIN COMPONENTS


Component Function
Headlight ECU Sub-assembly LH
·

Controls the automatic headlight beam level control system.

·

Detects the vehicle posture and vehicle driving conditions based on the rear height control sensor sub-assembly LH and skid control ECU to control the headlight leveling motor LH.


Headlight ECU Sub-assembly RH Controls the headlight leveling motor RH according to control signals from the headlight ECU sub-assembly LH.
Headlight Leveling Motor LH/RH Moves the headlights vertically and controls the beam axis direction according to control signals from the headlight ECU sub-assembly LH/RH.
Brake Actuator Assembly
·

Skid Control ECU


Transmits the vehicle speed signal to the headlight ECU sub-assembly LH.
Rear Height Control Sensor Sub-assembly LH Detects vehicle movement and transmits a signal to the headlight ECU sub-assembly LH.
Headlight Dimmer Switch Assembly Transmits a light control signal to the main body ECU (multiplex network body ECU).
Main Body ECU (Multiplex Network Body ECU) Receives a light control signal and transmits it to the headlight ECU sub-assembly LH.


SYSTEM CONTROL


a.

The headlight ECU sub-assembly LH receives vehicle height change signals sent from the rear height control sensor sub-assembly LH and calculates the changes in the pitch angle of the vehicle. The headlight ECU sub-assembly LH/RH drives the headlight leveling motor LH/RH in accordance with the change.

Control Mode Details
While Stopped If the vehicle attitude is stable for approximately 3 seconds with the headlights on while stopped, the headlight ECU sub-assembly LH/RH operates the headlight leveling motor LH/RH in accordance with the detected change in vehicle attitude.



FUNCTION


a.

The rear height control sensor sub-assembly LH detects the changes in vehicles rear ride height due to cargo loads etc., and operates the headlight leveling motor RH/LH in accordance with the changes, keeping the headlight axes at a constant angle.



FAIL-SAFE


a.

If the headlight ECU sub-assembly detects a malfunction in the automatic headlight beam level control system, the headlight ECU sub-assembly performs the fail-safe operation. For details, refer to the Repair Manual.