Home › Vehicle Interior › PRE-COLLISION › PRE-COLLISION SYSTEM › 2016.10–2020.08
NM32H0E _58 Vehicle Interior _059723 PRE-COLLISION _0292785 PRE-COLLISION SYSTEM DE DETAILS F

PRE-COLLISION  PRE-COLLISION SYSTEM  DETAILS  CAMERA HEATER  


OPERATING CONDITION


a.

When all of the following conditions have been met, the camera heater (forward recognition hood) operates.

·

The ignition switch is turned to ON.

·

The outside air temperature is approximately 10°C or less.

·

A few minutes have elapsed since the camera heater (forward recognition hood) operation stopped.



b.

After the camera heater (forward recognition hood) operates, the operation will stop when a certain length of time has elapsed.

HINT:

Operating time will differ depending on vehicle conditions (vehicle speed, outside air temperature, etc.).




CONSTRUCTION


a.

The camera heater (forward recognition hood) is composed of the sheet heater (heating element) and temperature fuse, etc. Current is run through the sheet heater (heating element) to generate heat and warm the front portion of the forward recognition camera (camera sensor).

Y206825C01
3.521,1.844 4.5,1.094 4.5,1.094 4.667,1.094 true 2.99,1.906 2.5,1.083 2.5,1.083 2.333,1.083 true 2.115,0.969 2.427,1.125 0.313,0.156 10 false *1 4.74,1.01 5.052,1.167 0.313,0.156 10 false *2
*1 Sheet Heater (Heating Element) *2 Temperature Fuse


Heater Specifications
Item Specification
Heat Generation 5 W or less