Home › Drivetrain › K313 (MULTIDRIVE / CVT) › CVT SYSTEM
NM32H0E _52 Drivetrain _062153 K313 MULTIDRIVE / CVT _0302987 CVT SYSTEM GE GENERAL F

K313 MULTIDRIVE / CVT  CVT SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

A K313 Continuously Variable Transaxle (CVT) is used.


b.

A 7-speed sport sequential shiftmatic mode is used.


c.

A straight type shift lever is used.


d.

A shift lock system is used to prevent the shift lever from being wrongly operated.


e.

A coaxial 2 discharge port oil pump system is used.



SPECIFICATION


Torque Converter Assembly
Item Specification
Torque Converter Assembly Type 3-element, 1-step, 2-phase
Stall Torque Ratio 1.90

Continuously Variable Transaxle
Item Specification

*: The weight shown is with the transaxle fully filled with fluid.

Shift Mechanism Electrohydraulic Control Type Steel-Belt Continuously Variable Transmission
Forward/Reverse Switching Mechanism Electronic Control Type Planetary Gear
Pulley Ratio (Speed Ratio) Forward 2.480 to 0.396
Reverse (Planetary gear ratio included) 2.604 to 1.680
Differential Gear Ratio (Reduction gear ratio included) 5.698
Shift Pattern P - R - N - D - M
Fluid Capacity Liters (US qts, Imp. qts) 7.62 (8.1, 6.7)
Fluid Type Toyota Genuine CVT Fluid FE
Weight (Reference)* kg (lb) 75.7 (166.9)

Gears and Friction Discs
Item Specification
Planetary Gear Sun Gear No. of Teeth 40
No. 1 Pinion Gear No. of Teeth 18
No. 2 Pinion Gear No. of Teeth 17
Ring Gear No. of Teeth 82
Forward Clutch No. of Discs 3
Reverse Brake No. of Discs 3
Reduction Gear Drive Gear No. of Teeth 25
Driven Gear No. of Teeth 37
Differential Gear Drive Pinion No. of Teeth 20
Ring Gear No. of Teeth 77


MAIN FEATURES


a.

The K313 CVT has achieved the following performance through the use of the items listed below.

Item Fuel Economy Power Efficiency Driveability Quietness Compact and Lightweight

○: Applicable

-: Not applicable

Pulley and Belt Type Shift Mechanism ○ ○ ○ ○ ○
Double Pinion Type Forward/Reverse Switching Mechanism ○ ○ ○ - ○
Torque Converter with Lock-up Clutch ○ ○ ○ ○ ○
High Pressure 2 Discharge Port Oil Pump ○ ○ ○ - ○
CVT Fluid Warmer (Transmission Oil Cooler) ○ - - - -
High-pressure Hydraulic Control Circuit (Valve Body Unit) ○ ○ ○ - -
Gear & CVT Belt Noise Reduction - - - ○ -
Electronic Control System Engine-CVT Integrated Control ○ ○ ○ - -
Automatic Shift Control ○ ○ ○ - -
Acceleration Improvement Control - ○ ○ - -
Deceleration Improvement Control - - ○ - -
7-speed sport sequential shiftmatic mode - - ○ - -
Uphill/Downhill Shift Control - - ○ - -
Lock-up Control ○ - ○ - -
Flex Lock-up Control ○ - ○ - -
Neutral Control ○ - - - -



PRECAUTION


a.

Ignition Switch Expressions

i.

The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section.

Expression Ignition Switch
(Position)
Engine Switch
(Condition)
Ignition Switch off LOCK Off (LOCK)
Ignition Switch ACC ACC On (ACC)
Ignition Switch ON ON On (IG)
Engine Start START On (Start)