Home › Drivetrain › EC69 (MANUAL TRANSMISSION / TRANSAXLE) › MANUAL TRANSAXLE SYSTEM › 2016.10–2019.09
NM32H0E _52 Drivetrain _062154 EC69 MANUAL TRANSMISSION / TRANSAXLE _0302989 MANUAL TRANSAXLE SYSTEM CO CONTROL F

EC69 MANUAL TRANSMISSION / TRANSAXLE  MANUAL TRANSAXLE SYSTEM  CONTROL  GEAR SHIFT INDICATOR SYSTEM  


FUNCTION


a.

In the Gear Shift Indicator system, the ECM calculates a shift position for good environmental driving performance from the vehicle conditions and sends a request signal to the combination meter assembly to indicate "upshifting/downshifting". Then, the Gear Shift Indicator in the combination meter assembly displays the shift recommendation to the driver.


b.

The ECM determines the actual shift position based on the signals from the speed sensors and crank position sensor, and the target shift position based on the signals from the accelerator pedal sensor assembly and speed sensors.


c.

By driving in accordance with the shift change recommendations that are indicated by the Gear Shift Indicator, the driver can enhance environmental driving performance, improving fuel economy and reducing exhaust gas output within limits of engine performance.

Control of Gear Shift Indicator System
Control Outline
Shifting Recommendation Control Calculates an environmentally favorable shift position based on the driving conditions of the vehicle, and gives shifting recommendation.
Shift Control in Uphill Traveling Prevents unnecessary shifting recommendations by estimating the grade of the road based on the driving conditions. Provides shift position recommendations that enable the vehicle to attain proper drive force.
Delta Throttle Accelerate Control Determines a deceleration request when the driver releases the accelerator pedal suddenly. Thus, it will not provide a shift-up instruction. However, it will provide a shift-up recommendation to protect the engine if the engine speed is high.


d.

The Gear Shift Indicator system will not effect control while the vehicle is being driven in reverse, while the vehicle is stopped, or when the clutch is not engaged.


e.

Upon receiving a shift instruction request from the ECM, the combination meter assembly will show a shift change recommendation on the multi-information display.

X135420E01
1.677,1.25 2.052,0.813 true 1.677,1.573 2.031,2.052 true 0.385,0.948 0.542,1.083 0.156,0.135 10 false * 2.104,0.677 2.26,0.854 0.156,0.177 10 false A 2.073,2 2.229,2.177 0.156,0.177 10 false B 2.917,0.875 4.188,1.063 1.271,0.188 10 false Illumination Location 4.719,0.865 6.125,1.073 1.406,0.208 10 false Instruction Description 3.448,1.333 3.604,1.51 0.156,0.177 10 false A 3.448,1.76 3.604,1.938 0.156,0.177 10 false B 4.656,1.323 6.271,1.531 1.615,0.208 10 false Shift-up Recommendation 4.573,1.719 6.365,1.927 1.792,0.208 10 false Shift-down Recommendation 4.063,2.354 7.063,2.583 3,0.229 10 false *: The illustrations shown are examples only.