Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › BRAKE CONTROL SYSTEM › 2018.05–2019.09
NM32H0E _54 Brake _060230 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0295457 BRAKE CONTROL SYSTEM GE GENERAL F

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  BRAKE CONTROL SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

The following brake control functions are provided: Anti-lock Brake System (ABS), Electronic Brake force Distribution (EBD), brake assist, Traction Control (TRC), Vehicle Stability Control (VSC), Active Cornering Assist (ACA)*, trailer sway control, hill-start assist control, brake hold and cooperative control with EPS.

*: Except models for Australia



b.

A VSC OFF switch is used.


c.

Cooperative control with the EPS and AWD* system is used.

*: AWD models




MAIN FEATURES


a.

Cooperative Control with EPS and AWD* system

i.

The cooperative control with EPS and AWD* system uses a cooperative control function that performs integrated control of the brake control system, Electric Power Steering (EPS) system and dynamic torque control AWD* system in accordance with driving conditions. Thus, the cooperative control with the EPS and AWD* system improves the dynamic performance of the vehicle to run, turn and stop, and enhances driving stability, driveability and acceleration performance during cornering.

*: AWD models

X135324E02
2.135,0.51 3.115,0.906 0.979,0.396 10 false Power Steering ECU Assembly 2.094,1.813 3.094,2.188 1,0.375 10 false 4WD ECU Assembly*1 2.167,3.458 3.073,3.844 0.906,0.385 10 false Airbag Sensor Assembly 2.104,4.365 3.146,4.573 1.042,0.208 10 false Steering Sensor 3.938,1.688 5.031,2.073 1.094,0.385 10 false Network Gateway ECU 3.917,0.521 5.052,0.719 1.135,0.198 10 false Skid Control ECU 4.323,3.656 4.688,3.875 0.365,0.219 10 false ECM 5.521,0.677 6.656,0.875 1.135,0.198 10 false Speed Sensor 5.521,1.094 6.646,1.479 1.125,0.385 10 false Stop Light Switch Assembly 5.521,2.76 6.969,3 1.448,0.24 10 false Engine Output Control 5.521,3.208 6.969,3.448 1.448,0.24 10 false Crank Position Sensor 5.521,3.688 7.063,3.938 1.542,0.25 10 false Throttle Position Sensor 5.521,4.042 6.646,4.458 1.125,0.417 10 false Accelerator Pedal Sensor Assembly 5.51,4.583 6.906,4.969 1.396,0.385 10 false Park/Neutral Position Switch Assembly*2 0.25,4.771 1.75,4.969 1.5,0.198 10 false *1: AWD Models 0.25,5.063 1.75,5.26 1.5,0.198 10 false *2: Models with CVT 0.542,5.427 2.24,5.635 1.698,0.208 10 false : CAN Communication Line





PRECAUTION


a.

When a brake control system is activated, the brake pedal may shudder. This is a normal occurrence of the system in operation and should not be considered a malfunction.


b.

The TRC and VSC functions control brake hydraulic pressure and engine output to enhance vehicle stability. Therefore, operate the VSC OFF switch (to stop the operation of the TRC and VSC functions) only when it is necessary.


c.

Ignition Switch Expressions

i.

The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section.

Expression Ignition Switch (Position) Engine Switch (Condition)
Ignition Switch off LOCK Off (Lock)
Ignition Switch ACC ACC On (ACC)
Ignition Switch ON ON On (IG)
Engine Start START On (Start)