Home › Engine / Hybrid System › 8NR-FTS (ENGINE MECHANICAL) › ENGINE UNIT › 2018.05–2019.09
NM32H0E _51 Engine / Hybrid System _060377 8NR-FTS ENGINE MECHANICAL _0296145 ENGINE UNIT GE GENERAL F

8NR-FTS ENGINE MECHANICAL  ENGINE UNIT  GENERAL  GENERAL  


OUTLINE


a.

The 8NR-FTS engine is an in-line, 4-cylinder, 1.2-liter, 16-valve DOHC, turbocharged engine with intercooler. This engine is a Direct injection 4-stroke gasoline engine (D-4). In addition, this engine uses the Variable Valve Timing-intelligent Wide (VVT-iW) control, Variable Valve Timing-intelligent (VVT-i) control, Direct Ignition System (DIS), Electronic Throttle Control System-intelligent (ETCS-i). It has been developed to achieve high performance, quietness, fuel economy and clean emissions.


b.

This engine uses ESTEC D-4T.

HINT:
·

Economy with Superior Thermal Efficient Combustion (ESTEC): An engine series which achieves thermal efficiency (fuel economy) improvements through continuous improvements to engine combustion.

·

Direct injection 4-stroke gasoline engine with Turbo (D-4T): A direct injection technology which uses a system to comprehensively perform supercharging control for the D-4 system and turbocharger to achieve a higher dimension of high tumble flow and turbo pressure control by optimizing the cylinder head ports and shape of the piston faces. As a result, fuel economy and low-speed torque are achieved.





SPECIFICATION


Item Specification
Engine Type 8NR-FTS (Models with GPF) 8NR-FTS (Models without GPF)
No. of Cyls. and Arrangement 4-cylinder, In-line 4-cylinder, In-line
Valve Mechanism 16-valve DOHC, Chain Drive (with VVT-iW and VVT-i) 16-valve DOHC, Chain Drive (with VVT-iW and VVT-i)
Combustion Chamber Pentroof Type Pentroof Type
Manifolds Cross-flow Cross-flow
Fuel System Sequential Multiport Fuel Injection (SFI) D-4 Sequential Multiport Fuel Injection (SFI) D-4
Ignition System Direct Ignition System (DIS) Direct Ignition System (DIS)
Displacement 1197 cm3 (73.0 cu. in.) 1197 cm3 (73.0 cu. in.)
Bore x Stroke 71.5 x 74.5 mm (2.81 x 2.93 in.) 71.5 x 74.5 mm (2.81 x 2.93 in.)
Compression Ratio 10.0 : 1 10.0 : 1
Max. Output (EEC) 85 kW @ 5200 to 5600 rpm 85 kW @ 5200 to 5600 rpm
Max. Torque (EEC) 185 N*m @ 1500 to 4000 rpm 185 N*m @ 1500 to 4000 rpm
Valve Timing Intake Open 41° to -29° BTDC 41° to -29° BTDC
Closed 29° to 99° ABDC 29° to 99° ABDC
Exhaust Open 24° to -16° BBDC 34° to -6° BBDC
Closed 6° to 46° ATDC -4° to 36° ATDC
Spark Plug Manufacture NGK NGK
Type DILKAR8J9G DILKAR8J9G
Plug Gap 0.8 to 0.9 mm (0.0315 to 0.0354 in.) 0.8 to 0.9 mm (0.0315 to 0.0354 in.)
Firing Order 1 - 3 - 4 - 2 1 - 3 - 4 - 2
Research Octane Number (RON) 95 or higher 95 or higher
Emission Regulations EURO 6d EURO 6


MAIN FEATURES


a.

The following performance features have been achieved for the 8NR-FTS engine through the use of the items listed below:

(A): High performance and reliability

(B): Low noise and vibration

(C): Lightweight and compact design

(D): Good serviceability

(E): Clean emissions and fuel economy

Item (A) (B) (C) (D) (E)
A high-expansion cycle (Atkinson cycle) is used. ○ - - - ○
Variable Valve Timing-intelligent Wide (VVT-iW) is used. ○ - - - ○
Variable Valve Timing-intelligent (VVT-i) is used. ○ - - - ○
A cylinder head sub-assembly made of aluminum alloy is used. - ○ ○ - -
A cylinder block sub-assembly made of aluminum alloy is used. - ○ ○ - -
A stiffening crankcase assembly made of aluminum alloy is used. - ○ ○ - -
A cylinder head sub-assembly with integrated exhaust manifold is used. ○ - - - ○
No. 1 valve rocker arm sub-assemblies are used. ○ ○ - ○ ○
Valve lash adjuster assemblies are used. ○ ○ - ○ -
A sodium-filled valve is used. ○ - - - -
A piston made of aluminum alloy is used. - - ○ - ○
The piston skirt is coated with resin. ○ - - - ○
Piston jets (No. 1 oil nozzle sub-assemblies) for cooling pistons are used. ○ - - - ○
Spiny-type liners are used in the cylinder bores. ○ - - - ○
An offset crankshaft is used. ○ - - - ○
A timing chain and chain tensioner are used. - ○ - ○ -
An intake manifold made of plastic is used. - - ○ - -
A turbocharger is used. ○ ○ ○ - ○
A water cooled type intercooler assembly is used. ○ - ○ - ○
A thermostat for cylinder block is used. ○ - - - ○
The Electronic Throttle Control System-intelligent (ETCS-i) is used. ○ - - - ○
The Direct injection 4-stroke gasoline engine (D-4) system is used. ○ - - - ○
A multiple injection holes (6-hole) type*1 or a slit nozzle type*2 high pressure fuel injector assembly is used. ○ ○ ○ - ○
Iridium-tipped spark plugs are used. ○ - - - ○
The wastegate valve control is used. ○ - - - ○
The air bypass valve control is used. - ○ - - -
The piston jet control system is used. ○ - - - ○

HINT:

○: Applicable

-: Not applicable

*1: Models with GPF

*2: Models without GPF