CONSTRUCTION
The shape of the crankshaft has been optimized to achieve a higher dimension of weight reduction, reliability and quietness.
The oil groove on the crankshaft bearing is made eccentric to reduce the amount of oil leakage from the bearing. This enables the capacity of the oil pump to be reduced in order to achieve a low friction operation.
A resin coating has been applied to the lining surfaces of the crankshaft bearings to achieve reliability and reduced friction.
Lead-free materials have been used for the crankshaft, crankshaft bearing and crankshaft thrust washer in consideration of environmental issues.
| *1 | Crankshaft | *2 | Crankshaft Thrust Washer |
| *3 | Crankshaft Bearing | - | - |
| *a | Resin Coating | *b | Oil Groove |