FUNCTION OF MAIN COMPONENTS
The main components of the exhaust emission control system are as follows:
| Component | Function |
|---|---|
|
*1: Models with GPF *2: Models without GPF |
|
| TWC | Reduces emissions by oxidation of CO and HC in exhaust gas and reduction of NOx. |
| Air Fuel Ratio Sensor (Bank 1, Sensor 1) | Is used to determine the concentration of oxygen remaining in the exhaust gas, and has a characteristic where its output is proportional to the air fuel ratio. |
| No. 2 Air Fuel Ratio Sensor (Bank 1, Sensor 2)*1 | Detects the oxygen concentration in the exhaust emission by measuring the electromotive force which is generated in the sensor itself. |
| Oxygen Sensor (Bank 1, Sensor 2)*2 | |
| No. 1 Turbo Pressure Sensor | Uses built-in semiconductors to detect the intake manifold pressure. |
| ECM | Controls the volume of fuel consumed based primarily on the signal from the air fuel ratio sensor, with minor corrections based on the signal from the oxygen sensor. This control optimizes the air fuel ratio. |