Home › Engine / Hybrid System › 8NR-FTS (ENGINE CONTROL) › SFI SYSTEM › from 2018.05
NM32H0E _51 Engine / Hybrid System _060396 8NR-FTS ENGINE CONTROL _0296167 SFI SYSTEM DE DETAILS F

8NR-FTS ENGINE CONTROL  SFI SYSTEM  DETAILS  TURBO PRESSURE SENSOR  


CONSTRUCTION


a.

The No. 1 turbo pressure sensor is installed to the intercooler assembly and detects the turbo pressure.


b.

The No. 2 turbo pressure sensor is installed to the intake manifold and is comprised of the turbo pressure sensor and thermistor type intake air temperature sensor which detects the intake air temperature.


c.

The turbo pressure sensor consists of a semiconductor which utilizes the characteristics of a silicon chip that changes its electrical resistance when pressure is applied to it. The sensor converts the intake air pressure into an electrical signal, and sends it to the ECM in an amplified form.

W134967E01
4.448,0.365 4.615,0.365 4.615,0.365 4.885,0.792 true 4.24,1.5 4.406,1.5 4.406,1.5 4.99,1.958 true 3.531,1.406 4.458,1.656 0.927,0.25 10 false Thermistor 3.646,0.271 4.573,0.521 0.927,0.25 10 false Silicon Chip 4.354,2.344 5.99,2.552 1.635,0.208 10 false Sensor Cross Section 2.781,4.406 5.094,4.646 2.313,0.24 10 false Sensor Output Characteristic 2.917,4.115 4.552,4.323 1.635,0.208 10 false Turbo Pressure (kPa) 1.479,3.323 3.115,3.531 1.635,0.208 10 false Output Voltage (V)