FUNCTION
"Bluetooth" is a worldwide wireless communication standard widely used as a short range communication tool.
| *1 | Radio Receiver Assembly
(Built-in "Bluetooth" Receiver Antenna) |
- | - |
| *a | The illustrations shown are examples only. The illustrations may differ from the actual audio head unit. | *b | Cellular Network |
| *c | Cellular Phone
("Bluetooth" Compatible Type) |
*d | Portable Audio Player
("Bluetooth" Compatible Type) |
| *e | "Bluetooth" Wireless Connection | - | - |
"Bluetooth" is a trademark owned by Bluetooth SIG, Inc.
"Bluetooth" is a wireless connection technology that uses the 2.4 GHz frequency band.
The communication performance of "Bluetooth" may vary depending on obstructions or radio wave conditions between communication devices, electromagnetic radiation, communication device sensitivity or antenna capacity.
|
The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. |
Hands-free function
The "Bluetooth" built-in radio receiver assembly and a "Bluetooth" compatible cellular phone* can be connected using a "Bluetooth" wireless connection. This enables the use of the hands-free function on the cellular phone even if the phone is in a pocket or bag. For this reason, it is not necessary to use a connector or cable to connect the cellular phone.
*: Some versions of "Bluetooth" compatible cellular phones may not function properly.
The hands-free function uses a "Bluetooth" wireless connection. A "Bluetooth" wireless connection can be affected by uncertain elements, such as vehicle location, time of day, etc. Therefore, problems related to establishing connection may be caused temporarily by "Bluetooth" connection conditions. It is necessary to check the frequency of occurrence, connection conditions using another cellular phone, etc. when performing diagnosis.
Compatible hands-free devices
| Required "Bluetooth" specifications | Ver. 1.1 or higher (Ver. 2.1+EDR recommended) |
| Compatible profiles | ·
HFP (Hands Free Profile) Ver. 1.0 or higher (Ver. 1.5 or higher recommended)* ·
OPP (Object Push Profile) Ver. 1.1 ·
PBAP (Phone Book Access Profile) Ver. 1.0 |
| Maximum number of hands-free devices that can be registered (including audio devices) | 5 |
*: This profile is necessary when using the hands-free function.
Some profiles described above may not be supported by the system depending on the audio head unit equipped.
If the specification of the connected Bluetooth phone is lower than the recommended or does not support the functions required, the available functions may be limited.
If a Bluetooth-compatible cellular phone does not support the Hands Free Profile (HFP), the cellular phone cannot be registered or data transmission such as Object Push Profile (OPP) or Phone Book Access Profile (PBAP) may not be available.
The Bluetooth hands-free system is included in the audio head unit.
"Bluetooth" audio function
The "Bluetooth" built-in radio receiver assembly and a "Bluetooth" compatible portable audio player* can be connected using a "Bluetooth" wireless connection. This enables files stored in the portable audio player to be heard from the vehicle speakers. In addition, operations such as play/stop can be performed directly from the radio receiver assembly.
*: Some versions of "Bluetooth" compatible audio players may not be able to be connected via the "Bluetooth" function, or music may play, but functions available using the radio receiver assembly may be limited.
Compatible "Bluetooth" audio devices
| Required "Bluetooth" specifications | Ver. 1.1 or higher (Ver. 2.1+EDR recommended) |
| Compatible profiles | ·
A2DP (Advanced Audio Distribution Profile) Ver. 1.0 or higher (Ver. 1.2 or higher recommended) ·
AVRCP (Audio/Video Remote Control Profile) Ver. 1.0 or higher (Ver. 1.3 or higher recommended) |
| Maximum number of audio devices that can be registered (including hands-free devices) | 5 |
When multiple Bluetooth-compatible devices are registered, the user can select different devices for the Bluetooth audio system and Bluetooth hands-free system.
The functions of the Bluetooth audio system that can be used vary with the version of the Audio/Video Remote Control Profile (AVRCP) supported by the Bluetooth audio player that is being used.
The Bluetooth audio control system is built into the audio head unit.