Home › Engine / Hybrid System › 8NR-FTS (ENGINE CONTROL) › SFI SYSTEM › 2019.09–2020.08
NM32H0E _51 Engine / Hybrid System _060396 8NR-FTS ENGINE CONTROL _0296167 SFI SYSTEM CO CONTROL F

8NR-FTS ENGINE CONTROL  SFI SYSTEM  CONTROL  DIRECT INJECTION 4-STROKE GASOLINE ENGINE SEQUENTIAL MULTIPORT FUEL INJECTION (D-4 SFI)  


FUNCTION


a.

A Direct injection 4-stroke gasoline engine Sequential multiport Fuel Injection (D-4 SFI) system which has both direct injection type and port injection type is used for the fuel injection system.


b.

The intake air mass is detected by the intake mass air flow meter sub-assembly to control the fuel injection volume.


c.

Based on signals from each sensor, the ECM controls the injection volume and timing of fuel injector assembly in accordance with the engine speed and engine load in order to optimize combustion conditions. Due to this, engine oil dilution reduction, low fuel consumption, and improved emission as well as high engine output are achieved.


d.

In order to fully maximize the effectiveness of the direct injection (cooling effect, jet stream use, air-fuel mixture form variance), multi-fuel injection system in which injection is divided over multiple times is used.

W139472E02
0.208,0.219 3.552,0.5 3.344,0.281 10 false Intake Mass Air Flow Meter Sub-assembly 0.271,0.573 3.615,0.854 3.344,0.281 10 false Intake Air Temperature Sensor 0.198,1.052 3.542,1.333 3.344,0.281 10 false Crank Position Sensor 0.208,1.49 3.26,1.927 3.052,0.438 10 false Intake Cam Position Sensor (No. 1 Crank Position Sensor) 0.198,2.281 3.406,2.708 3.208,0.427 10 false Exhaust Cam Position Sensor (No. 2 Crank Position Sensor) 0.208,3.073 3.552,3.354 3.344,0.281 10 false Air Fuel Ratio Sensor (Bank 1, Sensor 1) 0.208,3.51 3.552,3.792 3.344,0.281 10 false No. 2 Air Fuel Ratio Sensor (Bank 1, Sensor 2)*1 0.208,3.948 3.552,4.229 3.344,0.281 10 false Oxygen Sensor (Bank 1, Sensor 2)*2 0.208,4.385 3.552,4.667 3.344,0.281 10 false Accelerator Pedal Sensor Assembly 0.208,4.823 3.552,5.104 3.344,0.281 10 false Throttle Position Sensor 0.208,5.26 3.552,5.542 3.344,0.281 10 false Engine Coolant Temperature Sensor 0.208,5.698 3.552,5.979 3.344,0.281 10 false No. 1 Turbo Pressure Sensor 0.333,6.51 3.677,6.792 3.344,0.281 10 false Intake Air Temperature Sensor 0.208,6.177 3.552,6.458 3.344,0.281 10 false No. 2 Turbo Pressure Sensor 0.198,6.969 3.542,7.25 3.344,0.281 10 false Fuel Pressure Sensor 0.208,7.406 3.552,7.688 3.344,0.281 10 false Combination Meter Assembly 6.104,3.448 6.896,3.917 0.792,0.469 10 false Fuel Injector Assembly 4.646,3.885 5.219,4.146 0.573,0.26 10 false ECM 0.167,7.917 4.604,8.167 4.438,0.25 10 false *1: Models for Europe and Destination Package for Taiwan 0.167,8.25 5,8.542 4.833,0.292 10 false *2: Except Models for Europe and Destination Package for Taiwan


e.

Fuel injection is stopped to protect the engine and improve fuel efficiency.

Fuel Cut Speed at High Engine Speed
Engine Speed (rpm) Models for Europe and Destination Package for Taiwan 6400 or more
Except Models for Europe and Destination Package for Taiwan 5800 or more