Home › Drivetrain › AXLE AND DIFFERENTIAL › AXLE SYSTEM › from 2019.09
NM32H0E _52 Drivetrain _059756 AXLE AND DIFFERENTIAL _0292884 AXLE SYSTEM GE GENERAL F

AXLE AND DIFFERENTIAL  AXLE SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

Front Axle

i.

Compact and highly rigid double-row angular ball bearings are used. The double-row angular ball bearings and the axle hub are integrated to ensure high rigidity, thus achieving excellent driving stability and braking stability.


ii.

The sensor rotor is integrated in the bearing inner race.


iii.

A 12-point front axle shaft nut is used and staked in order to ensure that the front axle hub sub-assembly is properly tightened. Once removed, this nut cannot be reused.

X144703C01
2.917,0.833 3.083,0.833 3.083,0.833 3.927,1.531 true 2.667,3.167 2.833,3.167 2.833,3.167 3.854,2.167 true 4.521,1.948 5.25,2.667 5.25,2.667 5.417,2.667 true 4.333,1.583 5.333,1.083 5.333,1.083 5.5,1.083 true 2.74,0.74 2.906,0.906 0.167,0.167 10 false *1 2.479,3.073 2.729,3.229 0.25,0.156 10 false *2 5.49,2.563 5.802,2.719 0.313,0.156 10 false *3 5.583,0.99 5.896,1.146 0.313,0.156 10 false *4 0.188,3.521 0.438,3.677 0.25,0.156 10 false *a
*1 Double-row Angular Ball Bearing *2 Sensor Rotor
*3 Front Axle Shaft Nut (12-point) *4 Front Axle Hub Sub-assembly
*a The illustrations shown are examples only. - -


NOTICE:
·

Do not place magnetized objects close to the surface of the sensor rotor.

·

Do not allow any iron particles, iron sand, dust, debris or oil to come in contact with the surface of the sensor rotor.





b.

Rear Axle

i.

Compact and highly rigid double-row angular ball bearings are used. The double-row angular ball bearings and the axle hub are integrated to ensure high rigidity, thus achieving excellent driving stability and braking stability.


ii.

The sensor rotor is integrated in the bearing inner race.


iii.

A 12-point rear axle shaft nut is used on the AWD models and staked in order to ensure that the rear axle hub and bearing assembly is properly tightened. Once removed, this nut cannot be reused.

2WD Models
X135150C01
1.99,1.198 2.833,1.635 true 2.083,2.615 2.969,2.073 true 3.708,2.135 4.281,2.76 true 3.479,1.563 4.656,1.01 true 1.813,1.073 2.031,1.229 0.219,0.156 10 false *1 1.917,2.583 2.156,2.75 0.24,0.167 10 false *2 4.313,2.708 4.542,2.875 0.229,0.167 10 false *3 4.677,0.906 4.917,1.073 0.24,0.167 10 false *4
*1 Rear Speed Sensor *2 Sensor Rotor
*3 Rear Axle Hub and Bearing Assembly *4 Double-row Angular Ball Bearing


AWD Models
X135151C01
2.135,0.854 3.104,1.49 true 2.052,2.854 3.177,2.156 true 3.885,1.938 4.74,2.688 true 3.719,1.458 4.781,1.104 true 1.948,0.708 2.156,0.896 0.208,0.188 10 false *1 1.896,2.833 2.115,3.01 0.219,0.177 10 false *2 4.781,2.656 5,2.833 0.219,0.177 10 false *3 4.802,0.99 5.031,1.167 0.229,0.177 10 false *4
*1 Sensor Rotor *2 Double-row Angular Ball Bearing
*3 Rear Axle Shaft Nut (12-point) *4 Rear Axle Hub and Bearing Assembly


NOTICE:
·

Do not place magnetized objects close to the surface of the sensor rotor.

·

Do not allow any iron particles, iron sand, dust, debris or oil to come in contact with the surface of the sensor rotor.