Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › BODY STRUCTURE › from 2019.09
NM32H0E _59 Vehicle Exterior _060807 EXTERIOR PANELS / TRIM _0298244 BODY STRUCTURE DE DETAILS F

EXTERIOR PANELS / TRIM  BODY STRUCTURE  DETAILS  SOUND ABSORBING AND VIBRATION DAMPING MATERIAL  


CONSTRUCTION


a.

Sound Absorption and Insulation Structure around Engine Compartment

i.

A cowl top panel insulator and dash panel insulator outer are provided on the engine compartment side, minimizing penetration of engine noise and road noise into the cabin.


ii.

A hood insulator is provided below the hood sub-assembly to suppress engine drive noise which penetrates the cabin and provide excellent quietness.


iii.

A front fender seal and front side air guide sub-assembly are used in the front fender to reduce the noise which travels through the fender toward the cabin.


iv.

Noise absorbing material is provided for the fender splash shield sub-assembly FR, thus reducing sound created by flying sand, flying water and road noise.

Y251337C01
2.208,2.115 1.417,1.667 1.417,1.667 1.25,1.667 true 2.75,1.833 1.417,1.167 1.417,1.167 1.25,1.167 true 2.344,1.094 1.406,0.583 1.406,0.583 1.24,0.583 true 5.979,0.833 5.813,0.833 5.813,0.833 3.396,2.25 true 6,3.75 5.833,3.75 5.833,3.75 5,2.75 true 5.115,4.333 4.948,4.333 4.948,4.333 4.115,3.333 true 5.083,4.75 4.917,4.75 4.917,4.75 4,5.417 true 5.167,5.417 5,5.417 5,5.417 4.083,6.104 true 5.917,6.083 5.75,6.083 5.75,6.083 5.198,6.531 true 1.594,3.188 1.094,2.688 1.094,2.688 0.927,2.688 true 5.5,4 5.333,4 5.333,4 4.865,3.51 true 1.052,0.49 1.365,0.688 0.313,0.198 10 false *2 1.042,1.063 1.354,1.26 0.313,0.198 10 false *3 0.677,1.552 1.281,1.802 0.604,0.25 10 false *10 (*A) 6.052,0.75 6.365,0.948 0.313,0.198 10 false *1 6.042,3.656 6.354,3.854 0.313,0.198 10 false *6 3.781,2.406 3.938,2.604 0.156,0.198 10 true A 4.25,3.115 4.406,3.313 0.156,0.198 10 true A 5.156,4.24 5.469,4.438 0.313,0.198 10 false *5 5.156,4.667 5.469,4.865 0.313,0.198 10 false *7 5.208,5.313 5.521,5.51 0.313,0.198 10 false *8 5.958,6 6.271,6.198 0.313,0.198 10 false *9 3.583,7.219 3.896,7.417 0.313,0.198 10 false *a 0.719,2.583 1.031,2.781 0.313,0.198 10 false *4 5.552,3.885 6.156,4.135 0.604,0.25 10 false *10 (*A)
*A Models with Silencer - -
*1 Cowl Top Panel Insulator *2 Hood Insulator
*3 Front Fender Side Panel Protector RH *4 Front Fender Liner RH
*5 Front Fender Liner LH *6 Front Fender Side Panel Protector LH
*7 Front Fender Upper Protector *8 Front Fender Seal
*9 Front Side Air Guide *10 Silencer
*a A - A Cross Section - -



v.

The cowl inner silencer, cowl side silencer and dash panel insulator inner are provided in the cabin side. The dash panel insulator inner has a structure which enlarges the cowl side parts while filling in holes and gaps as much as possible. This structure absorbs and insulates mechanical noise such as engine noise and ensures excellent quietness.

Y249804C01
4.417,1 4.917,0.25 4.917,0.25 5.083,0.25 true 4.885,1.875 5.667,1.5 5.667,1.5 5.833,1.5 true 4.802,2.375 5.583,2 5.583,2 5.75,2 true 1,3.708 1.198,3.708 1.198,3.708 1.948,3.333 true 5.188,0.167 5.5,0.365 0.313,0.198 10 false *1 5.917,1.385 6.229,1.583 0.313,0.198 10 false *2 5.854,1.885 6.167,2.083 0.313,0.198 10 false *3 0.771,3.583 1.083,3.781 0.313,0.198 10 false *2
*1 Cowl Inner Silencer *2 Cowl Side Silencer
*3 Dash Panel Insulator Inner - -




b.

Sealing Material

i.

Foamed materials, damping foamed materials and sealant are optimally placed in the side member opening and front header to suppress wind noise and road noise which enter the cabin.

Y251339C01
1.813,7.667 2.25,8.167 2.25,8.167 2.417,8.167 true 0.75,1.51 1.167,1.083 1.167,1.083 1.333,1.083 true 2.167,6.417 2.333,6.417 2.333,6.417 2.698,6.906 true 5.75,6.604 6.083,6.167 6.083,6.167 6.25,6.167 true 1.875,4.563 2.615,5.063 2.615,5.063 2.781,5.063 true 1,4.906 1.167,4.906 1.167,4.906 1.49,4.49 true 5.917,4.698 6.313,4.813 6.313,4.813 6.479,4.813 true 3.917,1.656 4.667,3.5 4.667,3.5 4.833,3.5 true 4,3.5 4.167,3.5 4.167,3.5 4.281,3.052 true 2.781,3.5 2.948,3.5 2.948,3.5 3.063,3.052 true 2.333,1.271 2.417,0.5 2.417,0.5 2.583,0.5 true 2.99,1.01 3.083,0.333 3.083,0.333 3.25,0.333 true 3.698,0.917 3.833,0.25 3.833,0.25 4,0.25 true 4.406,0.917 4.542,0.25 4.542,0.25 4.708,0.25 true 5.594,1.156 5.729,0.49 5.729,0.49 5.896,0.49 true 5.698,1.448 6.167,0.917 6.167,0.917 6.333,0.917 true 5.281,2.323 6.667,1.75 6.667,1.75 6.833,1.75 true 4.896,4.479 5.313,4.354 5.313,4.354 5.479,4.354 true 2.469,8.063 2.781,8.26 0.313,0.198 10 false *c 6.302,6.063 6.615,6.26 0.313,0.198 10 false *c 1.969,6.302 2.281,6.5 0.313,0.198 10 false *c 2.781,4.969 3.094,5.167 0.313,0.198 10 false *a 0.833,4.823 1.146,5.021 0.313,0.198 10 false *a 5.521,4.281 5.833,4.479 0.313,0.198 10 false *a 0.771,3.875 1.083,4.073 0.313,0.198 10 false *d 3.656,3.854 3.969,4.052 0.313,0.198 10 false *e 4.875,3.396 5.188,3.594 0.313,0.198 10 false *a 3.792,3.375 4.104,3.573 0.313,0.198 10 false *a 2.573,3.375 2.885,3.573 0.313,0.198 10 false *a 2.615,0.396 2.927,0.594 0.313,0.198 10 false *b 3.281,0.24 3.594,0.438 0.313,0.198 10 false *b 1.385,0.979 1.698,1.177 0.313,0.198 10 false *b 5.948,0.385 6.26,0.583 0.313,0.198 10 false *a 6.375,0.802 6.688,1 0.313,0.198 10 false *a 1.625,2.552 1.792,2.729 0.167,0.177 10 true A 1.656,3.25 1.823,3.427 0.167,0.177 10 false A 6.875,1.635 7.115,1.833 0.24,0.198 10 false *a 4.042,0.146 4.354,0.344 0.313,0.198 10 false *a 4.76,0.146 5.073,0.344 0.313,0.198 10 false *a 5.896,2.688 6.208,2.885 0.313,0.198 10 false B 6.5,4.719 6.813,4.917 0.313,0.198 10 false *a 5.917,5.063 6.229,5.26 0.313,0.198 10 false *f 4.938,4.094 5.104,4.271 0.167,0.177 10 true B 4.917,4.75 5.083,4.927 0.167,0.177 10 true B
*a Foamed Material *b Damping Foamed Material
*c Hole Plug *d A - A Cross Section
*e View B *f B - B Cross Section




c.

Windshield Wind Noise Countermeasures

i.

The shape of the windshield moulding has been aligned with the flow of wind, enabling a reduction in wind noise.

Y251281C01
5.5,1.333 5.75,0.917 5.75,0.917 5.917,0.917 true 1.323,0.823 1.49,0.823 1.49,0.823 1.74,1.24 true 5.938,2.167 6.438,3 6.438,3 6.604,3 true 5.073,1.781 4.323,3.031 4.323,3.031 4.156,3.031 true 3.969,2.927 4.281,3.083 0.313,0.156 10 false *1 6.677,2.896 6.99,3.052 0.313,0.156 10 false *2 3.708,0.708 4.021,0.865 0.313,0.156 10 false *a 5.99,0.813 6.302,0.969 0.313,0.156 10 false *b 1.135,0.719 1.448,0.875 0.313,0.156 10 false *1 0.979,1.365 1.146,1.531 0.167,0.167 10 false A 1.385,1.625 1.552,1.792 0.167,0.167 10 true A
*1 Windshield Moulding *2 Windshield Glass
*a A - A Cross Section *b Air Flow