Home › Vehicle Interior › PRE-COLLISION › PRE-COLLISION SYSTEM › from 2020.08
NM32H0E _58 Vehicle Interior _059723 PRE-COLLISION _0292785 PRE-COLLISION SYSTEM DE DETAILS F

PRE-COLLISION  PRE-COLLISION SYSTEM  DETAILS  INDICATOR LIGHT/WARNING LIGHT/MULTI DISPLAY  


OPERATION


a.

Warning Indication

i.

The combination meter assembly uses the multi-information display, PCS warning light and buzzer to provide the driver with pre-collision system malfunction and indications.

Y265594C01
4.698,1.302 5.219,0.469 5.219,0.469 5.385,0.469 true 4.938,1.5 5.354,0.833 5.354,0.833 5.521,0.833 true 3,0.25 3.167,0.25 3.167,0.25 3.333,0.5 false 3.75,0.823 4.125,0.24 4.125,0.24 4.292,0.24 true 4.375,2.552 4.208,2.552 4.208,2.552 3.875,1.969 true 2.802,0.167 3.115,0.323 0.313,0.156 10 false *1 4.448,2.469 4.76,2.625 0.313,0.156 10 false *d 5.469,0.365 5.781,0.521 0.313,0.156 10 false *b 5.594,0.729 5.906,0.885 0.313,0.156 10 false *c 4.365,0.156 4.677,0.313 0.313,0.156 10 false *a
*1 Combination Meter Assembly
·

Buzzer


- -
*a Multi-information Display *b PCS Warning Light
*c VSC OFF Indicator Light *d LTA Indicator




b.

Pre-collision System Operation Status Display

i.

If the millimeter wave radar sensor assembly determines that the possibility of a collision is high, it sends a signal to the combination meter assembly. Upon receiving this signal, the combination meter assembly indicates a warning using the multi-information display.

Multi-information Display PCS Warning Light
BRAKE! Does not illuminate


ii.

When emergency steering assist operates, the LTA indicator in the combination meter assembly illuminates (green).



c.

Indicator Display when Pre-collision System Off

i.

When the pre-collision system is turned off in the settings menu of the multi-information display, the PCS warning light in the combination meter assembly illuminates and a message is displayed on the multi-information display.

Multi-information Display PCS Warning Light
Pre-Collision System Off. Illuminates


ii.

When pre-collision braking assist, pre-collision braking and emergency steering assist operation are turned off using the VSC OFF switch, the VSC OFF indicator light and PCS warning light in the combination meter assembly illuminate, and a message is displayed on the multi-information display.

Multi-information Display PCS Warning Light VSC OFF Indicator Light
VSC Turned Off. Pre-Collision Brake System Unavailable. Illuminates Illuminates



d.

Pre-collision System Warning Display

i.

When the system is not available, the following warning occurs to warn the driver.

Multi-information Display Detail PCS Warning Light Buzzer
Pre-Collision System Malfunction. Visit Your Dealer. This message appears when the forward recognition camera detects a system malfunction Illuminates Sounds once
Pre-Collision System Unavailable See owner's manual.
·

Millimeter wave radar sensor assembly low voltage malfunction

·

Other millimeter wave radar sensor assembly malfunction


Illuminates -
Pre-Collision System Out of temperature range Unavailable See owner's manual. Millimeter wave radar sensor assembly temperature malfunction Illuminates -
Pre-Collision System Radar sensor blocked Unavailable Clean radar sensor Dirty center mark of upper radiator grille or millimeter wave radar sensor assembly Illuminates -
Pre-Collision System Radar in self calibration Unavailable See owner's manual. Millimeter wave radar sensor assembly misaligned Illuminates -
Front camera Unavailable See owner's manual. Abnormal forward recognition camera voltage Illuminates -
Front camera Out of temperature range Unavailable Wait until normal temperature Forward recognition camera temperature outside of operational range Illuminates -
Front camera Low visibility Unavailable See owner's manual. Dirty or fogged windshield glass over the forward recognition camera Illuminates -




FUNCTION


a.

Changing settings of the pre-collision system

i.

Enabling/disabling the pre-collision system

1.

The pre-collision system can be enabled/disabled on setting display screen of the multi-information display.

HINT:

When the pre-collision system has been disabled using this setting, it will automatically be re-enabled after the ignition switch has been turned off and then back to ON again.


2.

If the system is disabled, the PCS warning light will turn on and a message will be displayed on the multi-information display.

Y265495C01
0.198,0.188 0.51,0.385 0.313,0.198 10 false *a 6.792,0.74 7.104,0.938 0.313,0.198 10 false *1 0.51,1.521 0.823,1.719 0.313,0.198 10 false *b
*1 Steering Pad Switch Assembly - -
*a Multi-information Display *b PCS Warning Light




ii.

Changing the pre-collision warning timing

1.

The pre-collision warning timing can be changed on setting display screen of the multi-information display.

HINT:

The warning timing setting is retained when the ignition switch is turned off. However, if the pre-collision system is disabled and re-enabled, the operation timing will return to the default setting (middle).


2.

If the pre-collision warning timing is changed, emergency steering assist timing will also be changed accordingly. If late is selected, emergency steering assist would not operate in case of an emergency.

Y265496C01
6.771,0.74 7.083,0.896 0.313,0.156 10 false *1 0.344,0.333 0.656,0.49 0.313,0.156 10 false *a 1.104,0.333 1.417,0.49 0.313,0.156 10 false *b 1.854,0.333 2.167,0.49 0.313,0.156 10 false *c
*1 Steering Pad Switch Assembly - -
*a Early *b Middle (This is the default setting.)
*c Late - -