Home › Drivetrain › K114 (MULTIDRIVE / CVT) › SHIFT LOCK SYSTEM › from 2022.01
NM32H0E _52 Drivetrain _059733 K114 MULTIDRIVE / CVT _0292853 SHIFT LOCK SYSTEM DE DETAILS F

K114 MULTIDRIVE / CVT  SHIFT LOCK SYSTEM  DETAILS  SHIFT LOCK MECHANISM  


FUNCTION OF MAIN COMPONENTS


Component Function
Shift Lock Control Unit Shift Lock Solenoid Locks the shift lever in P.
P Detection Switch Detects the shift lever in P.
Shift Lock Control ECU Controls the shift lock solenoid and the key interlock solenoid* based on signals from each switch.
Stop Light Switch Assembly Detects when the brake pedal is depressed.


SYSTEM CONTROL


a.

The shift lock control ECU uses the P detection switch to detect the shift lever position, and receives input signals from the stop light switch assembly and ignition switch. Upon receiving these signals, the shift lock control ECU turns on the shift lock solenoid in order to release the shift lock.



FUNCTION


a.

Shift Lock Mechanism

i.

The shift lock mechanism prevents the shift lever from being moved to any position other than P, unless the ignition switch is ON, the brake pedal is depressed and the shift lever knob button is operated. This mechanism helps to prevent unintentional acceleration.


ii.

A shift lock release button, which manually overrides the shift lock mechanism, is used.