Home › General › MAINTENANCE › 8NR-FTS DRIVE BELT
RM32H0E _V1 General _059503 MAINTENANCE _0291518 8NR-FTS DRIVE BELT A

MAINTENANCE  8NR-FTS DRIVE BELT  REMOVAL  


PROCEDURE

Hide 51443C 1.REMOVE REAR ENGINE UNDER COVER RH

a.
A390449

Remove the 2 screws, 6 clips and rear engine under cover RH from the vehicle.


Hide 16361A 2.REMOVE FAN AND GENERATOR V BELT

a.
A351477C02
2.906,1.854 2.635,1.458 true 2.917,1.885 3.229,2.083 0.313,0.198 10 false *a
*a 5 mm Hexagon Wrench


Release the fan and generator V belt tension by turning the V-ribbed belt tensioner assembly counterclockwise.


b.

Turn the V-ribbed belt tensioner assembly counterclockwise to align its holes, and then insert a 5 mm hexagon wrench to secure the V-ribbed belt tensioner assembly.


c.

Remove the fan and generator V belt.