Home › General › MAINTENANCE › 8NR-FTS DRIVE BELT
RM32H0E _V1 General _059503 MAINTENANCE _0291518 8NR-FTS DRIVE BELT A

MAINTENANCE  8NR-FTS DRIVE BELT  INSTALLATION  


PROCEDURE

Hide 16361A 1.INSTALL FAN AND GENERATOR V BELT

a.

Install the fan and generator V belt.

NOTICE:

Check that the fan and generator V belt is properly set to each pulley.



b.
A351478C02
0.75,2.01 0.75,1.427 true 0.667,2.063 0.979,2.26 0.313,0.198 10 false *a
*a 5 mm Hexagon Wrench


Turn the V-ribbed belt tensioner assembly counterclockwise and remove the 5 mm hexagon wrench.


Hide 51443C 3.INSTALL REAR ENGINE UNDER COVER RH

a.

Install the rear engine under cover RH to the vehicle with the 2 screws and 6 clips.