Home › Suspension › REAR SUSPENSION › REAR SHOCK ABSORBER
RM32H0E _53 Suspension _059601 REAR SUSPENSION _0292265 REAR SHOCK ABSORBER N

REAR SUSPENSION  REAR SHOCK ABSORBER  DISPOSAL  


PROCEDURE

Hide 48540 1.DISPOSE OF REAR SHOCK ABSORBER ASSEMBLY

a.
G102007

Extend the piston rod and secure the rear shock absorber assembly at an angle in a vise.


b.

Using a hacksaw, slowly make a hole at the position indicated by the arrow in the illustration to discharge the gas inside.

CAUTION:
C320205

·

Always use a cloth to prevent shards of metal flying about due to the release of pressurized gas.

·

Always wear safety glasses.



HINT:

The gas is colorless, odorless and non-poisonous.