The power steering ECU assembly receives signals from the ECM, skid control ECU (brake actuator assembly), forward recognition camera (w/ Toyota Safety Sense) and clearance warning ECU assembly (w/ Simple Intelligent Parking Assist System) via CAN communication.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Warning Indicate | Return-to-normal Condition | Note |
|---|---|---|---|---|---|---|
| U0100 | Lost Communication With ECM/PCM "A" | Lost communication with ECM | ·
CAN communication system ·
ECM |
EPS warning light: Does not come on | The ECU judges the system has returned to normal or the ignition switch is turned ON again | - |
| U0129 | Lost Communication with Brake System Control Module | Lost communication with skid control ECU (brake actuator assembly) | ·
CAN communication system ·
Skid control ECU (brake actuator assembly) |
EPS warning light: Comes on | The ECU judges the system has returned to normal or the ignition switch is turned ON again | - |
| U023A | Lost Communication with Front Camera Module | Lost communication with forward recognition camera | ·
CAN communication system ·
Forward recognition camera |
EPS warning light: Does not come on | The ECU judges the system has returned to normal or the ignition switch is turned ON again | w/ Toyota Safety Sense |
| U1110 | Lost Communication with Clearance Sonar Module | Lost communication with clearance warning ECU assembly | ·
CAN communication system ·
Clearance warning ECU assembly |
EPS warning light: Does not come on | The ECU judges the system has returned to normal or the ignition switch is turned ON again | w/ Simple Intelligent Parking Assist System |
Go to CAN communication system.
Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING
| Proceed to |
|---|
| NEXT |
NEXT