Home › Drivetrain › CLUTCH › CLUTCH MASTER CYLINDER (for RHD)
RM32H0E _52 Drivetrain _059611 CLUTCH _0292333 CLUTCH MASTER CYLINDER(for RHD) A

CLUTCH  CLUTCH MASTER CYLINDER(for RHD)  REMOVAL  


PROCEDURE

Hide 87211 1.REMOVE NO. 1 AIR DUCT

Hide 2.DRAIN BRAKE FLUID

NOTICE:

If brake fluid leaks onto any painted surface, immediately wash it off.


Hide 31434 3.DISCONNECT CLUTCH RESERVOIR TUBE

a.
C368392

Slide the hose clip and disconnect the clutch reservoir tube from the clutch master cylinder assembly.

HINT:

Use a container to collect the fluid.



Hide 31481 4.DISCONNECT CLUTCH MASTER CYLINDER TO FLEXIBLE HOSE TUBE

a.
C368393

Using a 10 mm union nut wrench, disconnect the clutch master cylinder to flexible hose tube from the clutch master cylinder assembly.

HINT:

Use a container to collect the fluid.



Hide 31410 5.DISCONNECT CLUTCH MASTER CYLINDER ASSEMBLY

Hide 31410 6.REMOVE CLUTCH MASTER CYLINDER ASSEMBLY

a.
C368394

Remove the 2 nuts and clutch master cylinder assembly from the body.