Home › Drivetrain › CLUTCH › CLUTCH UNIT (for EC6A)
RM32H0E _52 Drivetrain _059611 CLUTCH _0292334 CLUTCH UNIT(for EC6A) G

CLUTCH  CLUTCH UNIT(for EC6A)  INSPECTION  


PROCEDURE

Hide 31250 1.INSPECT CLUTCH DISC ASSEMBLY

C187769

a.

Using a vernier caliper, measure the rivet head depth.

Minimum Rivet Depth:

0.3 mm (0.0118 in.)


If necessary, replace the clutch disc assembly.


b.

Install the clutch disc assembly to the manual transaxle assembly.

HINT:

Insert the clutch disc assembly in the correct direction.



c.
C187770

Using a dial indicator, measure the clutch disc assembly runout.

Maximum Runout:

0.8 mm (0.0315 in.)


If necessary, replace the clutch disc assembly.


Hide 31210 2.INSPECT CLUTCH COVER ASSEMBLY

C235160E01
2.052,0.708 2.177,0.865 0.125,0.156 10 false A 2.781,0.448 2.938,0.635 0.156,0.188 10 false B

a.

Using a vernier caliper, measure the depth and width of the diaphragm spring wear.

Maximum:

A (Depth): 0.5 mm (0.0197 in.)

B (Width): 6.0 mm (0.236 in.)


If necessary, replace the clutch cover assembly.


Hide 13405 3.INSPECT FLYWHEEL SUB-ASSEMBLY

C235154

a.

Using a dial indicator, check the flywheel sub-assembly runout as shown in the illustration.

Maximum Runout:

0.1 mm (0.00394 in.)


If necessary, replace the flywheel sub-assembly.