Home › Drivetrain › K114 (MULTIDRIVE / CVT) › PARK / NEUTRAL POSITION SWITCH
RM32H0E _52 Drivetrain _059616 K114 MULTIDRIVE / CVT _0292457 PARK / NEUTRAL POSITION SWITCH G

K114 MULTIDRIVE / CVT  PARK / NEUTRAL POSITION SWITCH  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 84540 1.INSPECT PARK/NEUTRAL POSITION SWITCH OPERATION

a.

Apply the parking brake.


b.

Turn the ignition switch to ON.


c.

Depress the brake pedal and check that the engine starts when the shift lever is in N or P, but does not start in any other position.


d.

Check that the back-up light illuminates and the reverse warning buzzer sounds only when the shift lever is in R, but does not function in any other position.

If a malfunction or failure is found, check the park/neutral position switch for continuity.