Home › Drivetrain › K313F (MULTIDRIVE / CVT) › PARK / NEUTRAL POSITION SWITCH
RM32H0E _52 Drivetrain _059618 K313F MULTIDRIVE / CVT _0292482 PARK / NEUTRAL POSITION SWITCH G

K313F MULTIDRIVE / CVT  PARK / NEUTRAL POSITION SWITCH  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.SECURE VEHICLE

a.

Fully apply the parking brake and chock a wheel.

CAUTION:
·
C332327

Make sure to apply the parking brake and chock a wheel before performing this procedure.

·

If the vehicle is not secure and the shift lever is moved to N, the vehicle may suddenly move, possibly resulting in an accident or serious injury




Hide 84540 2.INSPECT PARK/NEUTRAL POSITION SWITCH

a.

Turn the ignition switch to ON.


b.

Depress the brake pedal and check that the engine starts when the shift lever is in N or P, but does not start in any other position.


c.

Check that the back-up light illuminates only when the shift lever is in R, but does not function in any other position.

If a malfunction or failure is found, check the park/neutral position switch for continuity.