Home › Drivetrain › K313F (MULTIDRIVE / CVT) › PARK / NEUTRAL POSITION SWITCH
RM32H0E _52 Drivetrain _059618 K313F MULTIDRIVE / CVT _0292482 PARK / NEUTRAL POSITION SWITCH G

K313F MULTIDRIVE / CVT  PARK / NEUTRAL POSITION SWITCH  INSPECTION  


PROCEDURE

Hide 84540 1.INSPECT PARK/NEUTRAL POSITION SWITCH

a.
C125840C24
1.292,0.927 0.896,0.521 0.896,0.521 0.792,0.521 true 1.448,0.927 1.25,0.229 1.25,0.229 1.135,0.229 true 1.677,0.938 1.896,0.208 1.896,0.208 2.01,0.208 true 1.99,0.938 2.406,0.375 2.406,0.375 2.5,0.375 true 1.365,1.406 1,1.854 1,1.854 0.906,1.854 true 1.521,1.417 1.438,2 1.438,2 1.344,2 true 1.823,1.417 1.958,1.979 1.958,1.979 2.063,1.979 true 2.563,0.302 2.865,0.531 0.302,0.229 10 false RB 2.063,0.135 2.313,0.313 0.25,0.177 10 false RL 0.917,0.146 1.177,0.323 0.26,0.177 10 false PL 0.646,0.448 0.844,0.667 0.198,0.219 10 false B 0.792,1.771 1.021,1.948 0.229,0.177 10 false L 1.146,1.927 1.417,2.115 0.271,0.188 10 false NL 2.115,1.896 2.365,2.104 0.25,0.208 10 false DL 0.104,0.073 0.365,0.26 0.26,0.188 10 false *a
*a Component without harness connected
(Park/Neutral Position Switch)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
4 (B) - 9 (L) Shift lever in P or N Below 1 Ω
Shift lever not in P and N 10 kΩ or higher
1 (RB) - 3 (PL) Shift lever in P Below 1 Ω
Shift lever not in P 10 kΩ or higher
1 (RB) - 2 (RL) Shift lever in R Below 1 Ω
Shift lever not in R 10 kΩ or higher
1 (RB) - 8 (NL) Shift lever in N Below 1 Ω
Shift lever not in N 10 kΩ or higher
1 (RB) - 7 (DL) Shift lever in D or M Below 1 Ω
Shift lever not in D and M 10 kΩ or higher


If the result is not as specified, replace the park/neutral position switch.