Home › Power Source / Network › NETWORKING › NETWORK GATEWAY ECU (for LHD) › 2016.10–2019.09
RM32H0E _57 Power Source / Network _059621 NETWORKING _0292522 NETWORK GATEWAY ECU(for LHD) A

NETWORKING  NETWORK GATEWAY ECU(for LHD)  INSTALLATION  


CAUTION / NOTICE / HINT

PROCEDURE

Hide 89111 1.INSTALL CENTRAL GATEWAY ECU (NETWORK GATEWAY ECU)

a.

Engage the claws to install the central gateway ECU (network gateway ECU).

E357143

NOTICE:

Make sure that the central gateway ECU (network gateway ECU) is securely installed.



Hide 82877 2.INSTALL ECU INTEGRATION BOX RH

a.

Install the ECU integration box RH with the bolt and 2 nuts.


b.
E357141C03
1.104,1.948 1.438,1.948 true 0.844,0.521 1.052,0.698 0.208,0.177 10 true *b 0.823,0.948 1.031,1.125 0.208,0.177 10 true *b 0.792,1.24 1,1.417 0.208,0.177 10 true *b 0.813,1.833 1.021,2.01 0.208,0.177 10 true *b 2.104,0.417 2.313,0.594 0.208,0.177 10 true *a 2.104,0.708 2.313,0.885 0.208,0.177 10 true *a 2.115,0.99 2.323,1.167 0.208,0.177 10 true *a
*a w/ Smart Key System
*b w/ Stop and Start System


Connect the connector.


c.

w/ Smart Key System:

i.

Connect the 3 connectors.



d.

w/ Stop and Start System:

i.

Connect the 3 connectors.


ii.

Engage the wire harness clamps.



e.

Engage the wire harness clamps.


Hide 55433B 3.INSTALL NO. 2 INSTRUMENT PANEL LOWER FINISH PANEL