Home › Vehicle Interior › SEAT › REAR SEAT ASSEMBLY
RM32H0E _58 Vehicle Interior _059623 SEAT _0292527 REAR SEAT ASSEMBLY A

SEAT  REAR SEAT ASSEMBLY  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


PROCEDURE

Hide 71940A 1.REMOVE REAR SEAT HEADREST ASSEMBLY (for RH Side)

a.

Remove the rear seat headrest assembly.


Hide 71940A 2.REMOVE REAR SEAT HEADREST ASSEMBLY (for LH Side)

a.

Remove the rear seat headrest assembly.


Hide 71960B 3.REMOVE REAR SEAT CENTER HEADREST ASSEMBLY (w/ Center Headrest)

a.

Remove the rear seat center headrest assembly.


Hide 73350C 4.DISCONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY

a.
B453977C01
2.594,1.646 2.896,1.427 true 2.917,1.26 3.156,1.479 0.24,0.219 10 false *a
*a Protective Tape
V113146

Insert Screwdriver Here


Using a screwdriver with its tip wrapped in protective tape, disconnect the rear center seat outer belt assembly as shown in the illustration.


Hide 5.REMOVE REAR SEATBACK ASSEMBLY RH

a.

Fold the rear seatback assembly RH forward.


b.
B473899C02
0.781,1.615 0.396,1.031 0.396,1.031 0.813,0.677 true 0.99,1.854 1.26,1.979 true 0.125,0.927 0.354,1.125 0.229,0.198 10 true *a 1.344,1.917 1.573,2.115 0.229,0.198 10 true *a
*a Hook and Loop Fastener


Disengage the hook and loop fasteners.


c.
B453979

Remove the 2 bolts.


d.

Disengage the guides to remove the rear seatback assembly RH.

NOTICE:

Be careful not to damage the vehicle body.



Hide 6.REMOVE REAR SEATBACK ASSEMBLY LH

a.

Fold the rear seatback assembly LH forward.


b.
B473900C02
2.896,1.073 1.635,0.792 1.635,0.792 2.49,0.479 true 2.354,1.438 2.802,1.177 true 1.354,0.677 1.583,0.875 0.229,0.198 10 true *a 2.094,1.375 2.323,1.573 0.229,0.198 10 true *a
*a Hook and Loop Fastener


Disengage the hook and loop fasteners.


c.
B453981

Remove the 2 bolts.


d.

Disengage the guides to remove the rear seatback assembly LH.

NOTICE:

Be careful not to damage the vehicle body.



Hide 7.REMOVE BENCH TYPE REAR SEAT CUSHION ASSEMBLY

a.
B453982C01
2.115,0.885 2.323,0.688 true 0.417,2.052 0.635,1.865 true 2.865,2.323 2.656,2.219 true 2.354,0.521 2.563,0.708 0.208,0.188 10 true *b 0.167,2.052 0.375,2.24 0.208,0.188 10 true *a 0.604,2.615 0.76,2.813 0.156,0.198 10 false A 2.448,3.01 2.604,3.208 0.156,0.198 10 false A 2.948,2.333 3.156,2.521 0.208,0.188 10 true *a
*a Rear Seat Cushion Frame Hook Front Side
*b Rear Seat Cushion Frame Hook Rear Side
V113146

Place Hands Here
V113147

Remove in this Direction (1)
V113148

Remove in this Direction (2)


Lift the front edge of the bench type rear seat cushion assembly as shown in the illustration and disengage the rear seat cushion frame hooks on the front side of the bench type rear seat cushion assembly from the rear seat cushion lock hooks.

NOTICE:

Be sure to hold the parts of the seat cushion assembly directly next to the rear seat cushion frame hooks when lifting it. Lifting a different part of the cushion may deform the rear seat cushion frame.


Standard Measurement:
Area Measurement
A 10 mm (0.394 in.)



b.

Disengage the rear seat cushion frame hook on the rear side of the bench type rear seat cushion assembly as shown in the illustration.

NOTICE:

Be careful not to damage the vehicle body.



Hide 72693 8.REMOVE REAR SEAT CUSHION LOCK HOOK

a.
B453983C01
0,0 0,0 false
V113147

Remove in this Direction


Disengage the claws to remove the rear seat cushion lock hook as shown in the illustration.

HINT:

Use the same procedure for the RH side and LH side.