Home › Vehicle Interior › SEAT › REAR SEAT ASSEMBLY
RM32H0E _58 Vehicle Interior _059623 SEAT _0292527 REAR SEAT ASSEMBLY A

SEAT  REAR SEAT ASSEMBLY  REASSEMBLY  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


PROCEDURE

Hide 71075B 1.INSTALL BENCH TYPE REAR SEAT CUSHION COVER

NOTICE:

When installing a bench type rear seat cushion cover, refer to Precaution in order to prevent wrinkles from forming.

Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY>PRECAUTION


a.

Engage the claws to install the bench type rear seat cushion cover to the No. 1 rear seat cushion pad sub-assembly.

B458479

NOTICE:

Be careful not to damage the bench type rear seat cushion cover.



b.

for 2WD:

i.

Install the rear seat cushion pad to the No. 1 rear seat cushion pad sub-assembly.

B460348


ii.

Engage the hooks and hook and loop fastener to install the bench type rear seat cushion cover.

B454009C01
3.583,2.281 3.729,1.927 true 3.74,1.813 3.938,1.979 0.198,0.167 10 true *a
*a Hook and Loop Fastener - -


NOTICE:

Be careful not to damage the bench type rear seat cushion cover.




c.

for 4WD:

i.

Install the rear seat cushion pad to the No. 1 rear seat cushion pad sub-assembly.

B460349


ii.

Engage the hooks and hook and loop fastener to install the bench type rear seat cushion cover.

B459879C03
3.573,2.302 3.802,1.917 true 3.813,1.813 4.031,1.99 0.219,0.177 10 true *a
*a Hook and Loop Fastener - -


NOTICE:

Be careful not to damage the bench type rear seat cushion cover.




Hide 73735 2.INSTALL CHILD RESTRAINT SEAT GUIDE CUP (w/ Cover)

a.
B454008

Install the child restraint seat guide cup.

HINT:

Use the same procedure for all child restraint seat guide cups.



Hide 73731C 3.INSTALL NO. 2 CHILD RESTRAINT SEAT COVER (w/ Cover)

a.
B458481C01
0,0 0,0 false
V113147

Install in this Direction


Engage the claws to install the No. 2 child restraint seat cover as shown in the illustration.

HINT:

Use the same procedure for all No. 2 child restraint seat covers.



Hide 73731B 4.INSTALL NO. 1 CHILD RESTRAINT SEAT COVER (w/ Cover)

a.
B458482C01
0,0 0,0 false
V113147

Install in this Direction


Engage the guides and claws to install the No. 1 child restraint seat cover as shown in the illustration.

HINT:

Use the same procedure for all No. 1 child restraint seat covers.



Hide 72640A 5.INSTALL REAR SEATBACK LOCK ASSEMBLY LH (for LH Side)

a.
B454005

Engage the guides to install the rear seatback lock assembly LH.


b.

Install the 2 bolts.

Torque:
30 N*m (306 kgf*cm, 22 ft.*lbf)


Hide 71078S 6.INSTALL SEPARATE TYPE REAR SEATBACK COVER (for LH Side)

NOTICE:

When installing a separate type rear seatback cover, refer to Precaution in order to prevent wrinkles from forming.

Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY>PRECAUTION


a.
B458483

Engage the claws to install the separate type rear seatback cover to the separate type rear seatback pad LH.

NOTICE:

Be careful not to damage the separate type rear seatback cover.



Hide 7.INSTALL SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for LH Side)

a.
B454003

Install the separate type rear seatback cover with pad to the rear seatback frame sub-assembly LH.


Hide 71931A 8.INSTALL REAR SEAT HEADREST SUPPORT (for LH Side)

a.
B458485C01
0,0 0,0 false
V113147

Install in this Direction


Engage the claws to install the 2 rear seat headrest supports as shown in the illustration.


Hide 71702C 9.INSTALL REAR SEATBACK BOARD SUB-ASSEMBLY LH (for LH Side)

a.
B453999

Engage the guides and claws to install the rear seatback board sub-assembly LH.


b.
B460290C01
1.24,1.094 1.573,1.094 true 2.104,1.094 2.438,1.094 true 1.906,0.99 2.219,1.146 0.313,0.156 10 false *a 1.646,1 1.958,1.156 0.313,0.156 10 false *a
*a Fastener


Close the 2 fasteners as shown in the illustration.


c.
B453986

Engage the hook.


Hide 72679 10.INSTALL REAR SEATBACK LOCK CONTROL BEZEL (for LH Side)

a.
B454000

Engage the hooks to the separate type rear seatback cover.


b.
B453996

Engage the claws to install a new rear seatback lock control bezel.


Hide 72630C 11.INSTALL REAR SEATBACK LOCK ASSEMBLY RH (for RH Side)

a.
B453995

Engage the guides to install the rear seatback lock assembly RH.


b.

Install the 2 bolts.

Torque:
30 N*m (306 kgf*cm, 22 ft.*lbf)


Hide 73350C 12.INSTALL REAR CENTER SEAT OUTER BELT ASSEMBLY (for RH Side)

Hide 71077S 13.INSTALL SEPARATE TYPE REAR SEATBACK COVER (for RH Side)

NOTICE:

When installing a separate type rear seatback cover, refer to Precaution in order to prevent wrinkles from forming.

Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY>PRECAUTION


a.
B458486

Engage the claws to install the separate type rear seatback cover to the separate type rear seatback pad RH.

NOTICE:

Be careful not to damage the separate type rear seatback cover.



Hide 14.INSTALL SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for RH Side)

a.
B453993

Pass the rear center seat outer belt assembly through the separate type rear seatback cover with pad and temporarily install the separate type rear seatback cover with pad to the rear seatback frame sub-assembly RH as shown in the illustration.


Hide 71931A 15.INSTALL REAR SEAT CENTER HEADREST SUPPORT (w/ Center Headrest)

a.
B458489C01
0,0 0,0 false
V113147

Install in this Direction


Engage the claws to install the 2 rear seat center headrest supports as shown in the illustration.


Hide 71931A 16.INSTALL REAR SEAT HEADREST SUPPORT (for RH Side)

a.
B458487C01
0,0 0,0 false
V113147

Install in this Direction


Engage the claws to install the 2 rear seat headrest supports as shown in the illustration.


Hide 71701C 17.INSTALL REAR SEATBACK BOARD SUB-ASSEMBLY RH (for RH Side)

a.
B453988

Engage the guides and claws to install the rear seatback board sub-assembly RH.


b.
B460291C01
0.635,1.25 1.135,1.083 true 1.875,1.073 2.51,1.292 true 1.208,0.979 1.521,1.135 0.313,0.156 10 false *a 1.688,0.969 2,1.125 0.313,0.156 10 false *a
*a Fastener


Close the 2 fasteners as shown in the illustration.


c.
B453986

Engage the hook.


Hide 72679 18.INSTALL REAR SEATBACK LOCK CONTROL BEZEL (for RH Side)

a.
B453989

Engage the hooks to the separate type rear seatback cover.


b.
B453985

Engage the claws to install a new rear seatback lock control bezel.


Hide 73373F 19.INSTALL REAR SEAT SHOULDER BELT HOLE COVER (for RH Side)

a.
B441951

Install the rear seat shoulder belt hole cover.


Hide 73178A 20.INSTALL SEAT BELT ANCHOR COVER CAP (for RH Side)

a.
B460353C01
0,0 0,0 false
V113147

Install in this Direction


Engage the guides to install the seat belt anchor cover cap as shown in the illustration.


b.
B458501C01
0,0 0,0 false
V113147

Install in this Direction (1)
V113148

Install in this Direction (2)


Engage the guides and claws to install the rear seat shoulder belt cover with seat belt anchor cover cap as shown in the illustration.