Home › Vehicle Interior › SEAT › LUMBAR SUPPORT ADJUSTER ASSEMBLY
RM32H0E _58 Vehicle Interior _059623 SEAT _0292529 LUMBAR SUPPORT ADJUSTER ASSEMBLY G

SEAT  LUMBAR SUPPORT ADJUSTER ASSEMBLY  INSPECTION  


PROCEDURE

Hide 72760D 1.INSPECT LUMBAR SUPPORT ADJUSTER ASSEMBLY

a.
B161051C28
0.208,0.167 0.958,0.823 0.75,0.656 10 false *a
*a Component without harness connected
(Lumbar Support Adjuster Assembly)


Check the operation of the lumbar support adjuster assembly.

i.

Apply battery voltage to the lumbar motor connector, and check that the lumbar support adjuster assembly operates smoothly as follows.

OK:
Battery Connection Operational Direction
Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 2
Seatback moves forward
Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 1
Seatback moves backward


If the result is not as specified, replace the lumbar support adjuster assembly.