Home › General › MAINTENANCE › TRANSMITTER BATTERY(w/ Entry and Start System)
RM32H0E _V1 General _059503 MAINTENANCE _0292539 TRANSMITTER BATTERY(w/ Entry and Start System) A

MAINTENANCE  TRANSMITTER BATTERY(w/ Entry and Start System)  INSTALLATION  


CAUTION / NOTICE / HINT

NOTICE:

Take extra care when handling these precision electronic components.


PROCEDURE

Hide 89745C 1.INSTALL TRANSMITTER BATTERY

a.
B424066C02
2.188,1.156 2.26,1.198 false
V113147

Install in this Direction


Install a new transmitter battery with the positive (+) side facing upward, as shown in the illustration.

NOTICE:
·

Do not bend the transmitter battery electrode during installation.

·

Keep the inside of the transmitter housing cover free of dust and oil.

·

When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical key transmitter sub-assembly from being damaged.




b.
B424064C02
2.073,1.26 2.052,1.188 false
V113147

Install in this Direction


Install the transmitter housing cover by pressing down on it as shown in the illustration.


c.
B424062C02
1.406,1.625 1.469,1.688 false
V113147

Install in this Direction


Insert the mechanical key into the transmitter as shown in the illustration.


d.

Press one of the transmitter switches and check that the LED illuminates.

OK:

Transmitter LED illuminates when a switch is pressed.