Home › General › MAINTENANCE › TRANSMITTER BATTERY(w/o Entry and Start System)
RM32H0E _V1 General _059503 MAINTENANCE _0292540 TRANSMITTER BATTERY(w/o Entry and Start System) A

MAINTENANCE  TRANSMITTER BATTERY(w/o Entry and Start System)  INSTALLATION  


CAUTION / NOTICE / HINT

NOTICE:

Take extra care when handling these precision electronic components.


PROCEDURE

Hide 89745C 1.INSTALL TRANSMITTER BATTERY

a.
B405467C01
0,0 0,0 false
V113147

Install in this Direction


Install a new transmitter battery with the positive (+) side facing upward, as shown in the illustration.

NOTICE:
·

Do not bend the transmitter battery electrode during installation.

·

Keep the inside of the transmitter housing cover free of dust and oil.

·

When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.




Hide 89758 2.INSTALL DOOR CONTROL TRANSMITTER PACKING

a.
B405468C02
0,0 0,0 false
V113147

Install in this Direction


Install the door control transmitter packing as shown in the illustration.


Hide 89751A 3.INSTALL TRANSMITTER HOUSING COVER

a.
B405469C01
0,0 0,0 false
V113147

Install in this Direction


Install the transmitter housing cover as shown in the illustration.