Home › Vehicle Interior › DOOR LOCK › DOOR CONTROL TRANSMITTER(w/ Entry and Start System)
RM32H0E _58 Vehicle Interior _059647 DOOR LOCK _0292595 DOOR CONTROL TRANSMITTER(w/ Entry and Start System) A

DOOR LOCK  DOOR CONTROL TRANSMITTER(w/ Entry and Start System)  REMOVAL  


CAUTION / NOTICE / HINT

NOTICE:

Take extra care when handling these precision electronic components.


PROCEDURE

Hide 89745C 1.REMOVE TRANSMITTER BATTERY

a.
B424061C02
2.396,1.844 2.427,1.458 false 2.333,1.854 2.646,2.052 0.313,0.198 10 false *a
*a Release Hook Knob
V113147

Remove in this Direction


Slide the release hook knob to remove the mechanical key as shown in the illustration.


b.
B424063C02
1.594,1.76 1.781,1.313 true 1.521,1.771 1.833,1.969 0.313,0.198 10 false *a
*a Protective Tape


Using a screwdriver with its tip wrapped in protective tape, remove the transmitter housing cover as shown in the illustration.

NOTICE:

Do not use excessive force when prying apart the transmitter housing cover.



c.
B424065C02
2.625,1.604 2.531,1.135 true 2.573,1.615 2.885,1.813 0.313,0.198 10 false *a
*a Protective Tape
V113147

Remove in this Direction


Using a screwdriver with its tip wrapped in protective tape, remove the transmitter battery as shown in the illustration.

NOTICE:
·

Do not push the terminals with your finger.

·

Do not forcibly pry up the transmitter battery as the terminals may be damaged.

·

Do not touch the transmitter battery with wet hands. Moisture may cause rust.

·

Do not touch or move any components inside the transmitter housing case. It may interfere with proper operation.

·

When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical key transmitter sub-assembly from being damaged.