Home › Vehicle Interior › DOOR LOCK › DOOR CONTROL TRANSMITTER(w/o Entry and Start System)
RM32H0E _58 Vehicle Interior _059647 DOOR LOCK _0292596 DOOR CONTROL TRANSMITTER(w/o Entry and Start System) A

DOOR LOCK  DOOR CONTROL TRANSMITTER(w/o Entry and Start System)  REMOVAL  


CAUTION / NOTICE / HINT

NOTICE:

Take extra care when handling these precision electronic components.


PROCEDURE

Hide 89751A 1.REMOVE TRANSMITTER HOUSING COVER

a.
B458231C02
0.813,1.292 0.583,0.906 false 0.396,0.76 0.708,0.958 0.313,0.198 10 false *a
*a Protective Tape
V113147

Remove in this Direction


Using a screwdriver with its tip wrapped in protective tape, remove the transmitter housing cover as shown in the illustration.

NOTICE:

Do not use excessive force when prying apart the transmitter housing cover.



Hide 89758 2.REMOVE DOOR CONTROL TRANSMITTER PACKING

a.
B458232C01
0.719,0.688 0.917,1.115 false 0.531,0.563 0.844,0.76 0.313,0.198 10 false *a
*a Protective Tape
V113147

Remove in this Direction


Using a screwdriver with its tip wrapped in protective tape, remove the door control transmitter packing as shown in the illustration.


Hide 89745C 3.REMOVE TRANSMITTER BATTERY

a.
B458233C01
0.615,1.271 0.677,0.802 false 0.479,1.281 0.792,1.479 0.313,0.198 10 false *a
*a Protective Tape
V113147

Remove in this Direction


Using a screwdriver with its tip wrapped in protective tape, remove the transmitter battery as shown in the illustration.

NOTICE:
·

Do not push the terminals with your finger.

·

Do not forcibly pry up the transmitter battery as the terminals may be damaged.

·

Do not touch the transmitter battery with wet hands. Moisture may cause rust.

·

Do not touch or move any components inside the transmitter. It may interfere with proper operation.

·

When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.