Home › Vehicle Interior › DOOR LOCK › UNLOCK WARNING SWITCH
RM32H0E _58 Vehicle Interior _059647 DOOR LOCK _0292598 UNLOCK WARNING SWITCH G

DOOR LOCK  UNLOCK WARNING SWITCH  INSPECTION  


PROCEDURE

Hide 84052 1.INSPECT UNLOCK WARNING SWITCH ASSEMBLY

a.
B447985C03
1.802,2.854 2.292,3.063 true 1.604,2.875 1.125,3.083 true 0.646,0.26 0.958,0.458 0.313,0.198 10 false *b 0.635,1.073 0.948,1.271 0.313,0.198 10 false *c 0.865,2.052 1.177,2.25 0.313,0.198 10 false *a 2.344,2.979 2.76,3.188 0.417,0.208 10 false UN+ 0.802,2.99 1.219,3.198 0.417,0.208 10 false UN-
*a Component without harness connected
(Unlock Warning Switch Assembly)
*b Not Pushed
*c Pushed


Check the resistance.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
1 (UN+) - 2 (UN-) Pushed Below 1 Ω
1 (UN+) - 2 (UN-) Not Pushed 10 kΩ or higher


If the result is not as specified, replace the unlock warning switch assembly.