Home › General › MAINTENANCE › 3ZR-FAE DRIVE BELT
RM32H0E _V1 General _059503 MAINTENANCE _0292820 3ZR-FAE DRIVE BELT A

MAINTENANCE  3ZR-FAE DRIVE BELT  INSTALLATION  


PROCEDURE

Hide 16361A 1.INSTALL FAN AND GENERATOR V BELT

a.
A313143N02
1.854,0.833 2.583,0.25 2.583,0.25 2.75,0.25 true 0.417,1.427 0.625,1.427 0.625,1.427 1.531,0.844 true 2.802,0.167 2.958,0.365 0.156,0.198 10 false A 0.271,1.344 0.427,1.542 0.156,0.198 10 false B

Set the fan and generator V belt onto every pulley.


b.

Attach a wrench to the hexagonal portion (A) or (B) of the V-ribbed belt tensioner assembly as shown in the illustration, and while rotating the V-ribbed belt tensioner assembly clockwise, remove the 5 mm bi-hexagon wrench.

NOTICE:

Check that the fan and generator V belt is properly set to each pulley.



Hide 51443C 3.INSTALL REAR ENGINE UNDER COVER RH

a.

Install the rear engine under cover RH to the vehicle with the 2 screws and 6 clips.